Yahoo!奇摩新聞-中央社-吳憶樺寫信向陳總統陳情希望留在台灣

From david at thbuo.gov.tw Mon Jan 20 09:08:59 2003 From: david at thbuo.gov.tw (David Chang) Date: Sun Jan 19 17:07:18 2003 Subject: [horde] enable UTF-8 then cause these problems Message-ID: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> 撘閧鍂 Jan Schneider : > Zitat von David Chang : > > > Hi all: > > Today i update horde via cvs,I make these changes > > 1.Set horde/config/nls.php > > $nls['conf']['enable_utf'] = true ; > > 2.Chang php.ini like this: > > mbstring.language = Chinese > > mbstring.internal_encoding = UTF-8 > > mbstring.http_input = auto > > mbstring.http_output = UTF-8 > > mbstring.func_overload = 7 > > These ini settings aren't necessary anymore if you enable utf-8 support. > > > 3.Restart apache+php 4.3 > > > > After login into horde ,some places look right with Chinese format ,but > > some > > are not.I thought maybe mb_string not be used in some place,so cause such > > problem. > > There are > > > > 1.imp->option->Personal Information. > > (Original data stored in Mysql with BIG-5 format) > > 2.nag/mnemo/kronolith's category name. > > (Original data stored in Mysql with BIG-5 format) > > 3.Calendar's name,Notepad's name & Task Lists's name > > (Original data stored in Mysql with BIG-5 format) > > These are stored in the preferences. Should be fixed now. after update via cvs,this morning 1. charset problem fixed,but original personal information were lost. 2. Fixed. 3. Calendar's name,Notepad's name & Task Lists's name still in wrong format. mean while some problems were found,there are: a. Original filter rule in IMP were lost. b. Some of mail's subject,body still in wrong format in IMP even they were send through in Chinese format via Yahoo webmail. Please ref http://www.thbuo.gov.tw/~txg16/tmp/920120.jpg ,also i have attached one of these mail . c. Chinese folders does not look correct after UTF-8 used.Can IMP automaticly handle folder name to transfer into UTF-8 ? Or user got manualy rename every folder name one by one ? -------------- next part -------------- From clw54248kimo@yahoo.com.tw 週日 1月 19 13:45:24 2003 Return-Path: Received: from w2.mtf.tpe.yahoo.com (w2.mtf.tpe.yahoo.com [202.1.237.94]) by webmail.thbuo.gov.tw (8.11.6/8.11.6) with ESMTP id h0J5jNj28402 for ; Sun, 19 Jan 2003 13:45:24 +0800 Received: (from yahoo@localhost) by w2.mtf.tpe.yahoo.com (8.12.3/8.12.3) id h0J5fuZd038759; Sun, 19 Jan 2003 13:41:56 +0800 (CST) (envelope-from yahoo-dev-null@yahoo-inc.com) Date: Sun, 19 Jan 2003 13:41:56 +0800 (CST) Message-Id: <200301190541.h0J5fuZd038759@w2.mtf.tpe.yahoo.com> From: clw54248kimo@yahoo.com.tw To: david@thbuo.gov.tw Cc: Reply-to: clw54248kimo@yahoo.com.tw Subject: Yahoo!奇摩新聞-中央社-吳憶樺寫信向陳總統陳情希望留在台灣 Errors-To: refertofriend-error@reply.yahoo.com MIME-Version: 1.0 Content-Type: text/html 張一一寄了一則新聞給你喔!!
------------------------------------------------------------
給您的留言：

將以下這篇新聞寄給朋友

吳憶樺寫信向陳總統陳情希望留在台灣

吳憶樺寫信向陳總統陳情希望留在台灣
http://tw.news.yahoo.com/2003/01/19/society/cna/3768206.html

新聞首頁＞社會新聞＞中央社	2003年01月19日
中央社分類新聞：即時 - 政治 - 社會 - 國際 - 財經 - 影視 - 體育 - 生活 - 休閒 - 兩岸 - 健康

吳憶樺寫信向陳總統陳情希望留在台灣

　　(中央社記者陳永昌台北十九日電)台灣、巴西混血兒吳憶樺的監護權，日前經法院判給吳憶樺巴西外婆羅莎後，吳憶樺的叔叔吳火眼等家屬今天帶著吳憶樺到總統府陳情。吳憶樺寫了一封信給陳水扁總統，表明他希望留在台灣的心願，希望陳總統幫助他。他也寫一張賀年卡給外婆，祝她平安健康。

　　吳火眼和吳憶樺等人一早就搭乘巴士從高雄北上，十時許抵達總統府前面的二二八紀念公園，立即受到媒體記者的包圍。吳憶樺以流利的國語和台語，清楚表達他希望能夠獲得陳總統的幫助，達成他留在台灣的心願，隨即吳火眼和吳憶樺等人進入總統府陳情。

　　吳憶樺接受媒體訪問時，唸出他以國字和注音符號寫給陳總統的信。內容是：「陳總統你好，我是吳憶樺，我常常在電視上看到你，可是沒有看過你。自從我來到台灣，大家都對我很好，我覺得很高興，現在我上一年級了，認識很多新老師和新同學，也學會了很多事，我喜歡這裡，想留在這裡，可是大人說還要法官審判，我聽不懂。陳總統，我要留下來，不要回去，這是我心裡的話，你可不可以幫我想辦法讓我留在台灣，我好喜歡這裡，更喜歡你做我的總統，謝謝你，快過年了，我祝你新年快樂，吳憶樺敬上。」

　　吳憶樺也唸他給外婆的賀年卡，內容是：「羅莎奶奶，您好，好久不見了，我已經上小學了，我在這裡過得很好，也認識了新同學，大家都很照顧我，請奶奶放心，快過年了，我畫了一張賀年卡送給您，等學校放暑假，我再回去看您，請奶奶保重身體，祝您平安健康，孫子吳憶樺敬上。」

　　吳憶樺是以國字和注音符號寫這張賀年卡，奶奶是否看得懂，他表示不知道；不過在巴西應該有人可以幫助奶奶看懂這張卡片。他以流利的台語說，寫信給陳總統是希望總統幫助他留在台灣，他強調台灣比較好玩，與朋友玩也相當好。

　　吳火眼則說，自從他哥哥吳登樹去世，他就尊重吳憶樺的心願，要留在台灣就留在台灣，要回巴西就回巴西。曾經與羅莎協調，可以將吳登樹的遺產歸給羅莎，讓吳憶樺能夠留在台灣受教育；要吳憶樺回去也可以，但希望吳憶樺每年可以回來祭拜吳登樹。

　　吳火眼強調，羅莎長年洗腎和重聽，身體狀況不佳如何能夠照顧自己的母親、兩個孩子和吳憶樺同母異父的哥哥？吳登樹是他的哥哥，他爭取吳憶樺留在台灣是為了吳憶樺的將來，希望陳總統能夠尊重吳憶樺的人權，讓他留在台灣。

　　吳火眼指出，羅莎在巴西是依靠救助金在生活，而他一家包括吳憶樺五口人，仍能夠生活，大家看吳憶樺長得白白胖胖，爭取吳憶樺留在台灣，無非是顧念吳登樹是他的兄弟。920119

消費新知‧不可不知

‧	開車族，請珍惜自己的生命！
‧	聰明投保旅遊險，送你免費日本旅遊！
‧	加保駕駛人傷害險就送中油加油券！

回上一頁

會員中心∣服務說明∣Yahoo!奇摩

From eric.piollet at chpyr.aquisante.fr Mon Jan 20 11:03:34 2003 From: eric.piollet at chpyr.aquisante.fr (Eric Piollet) Date: Mon Jan 20 01:57:06 2003 Subject: [horde] Horde configuration ?? Message-ID: <1043057014.56520772e8cbf@messagerie2> For me @ are : firstname.surname@mycompagny.fr I would to have in the horde page: welcome firstname surname (instead of welcome userid) In my passwd file i have : username ,..., complete name ( firstname surname) How can i configure Horde to read this field (complete name) to have on my screen : welcome firstname surname ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ From efetepe at efetepe.com Mon Jan 20 19:42:06 2003 From: efetepe at efetepe.com (EFETEPE MANAGER) Date: Mon Jan 20 10:33:53 2003 Subject: [horde] Can you Help me whit IMP Problem Message-ID: <01f001c2c0b3$a25edc80$0a01a8c0@SERVER> Hello I'm Jordi from Tarragona - Catalunya - Spain I have a IMP problem when try connect to IMAP the server tell me: Couldn't open stream {localhost:143/imap}INBOX in /wwwroot/horde-2.1/imp/test.php on line 160 Couldn't open stream {localhost:110/pop3}INBOX in /wwwroot/horde-2.1/imp/test.php on line 160 I have test connection via localhost and IP. I have test diferents versions of PHP (php-4.1.1, php-4.2.1 and php-4.2.3) I have active the horde log and it tells me: ene 20 18:07:55 HORDE [error] [imp] FAILED LOGIN IP1 (forwarded for [IP2]) to IP-SERVER:143[imap/no tls] as jordi.galenics.com [on line 275 of "/wwwroot/horde-2.1/imp/lib/IMP.php"] ene 20 18:07:55 HORDE [error] [imp] FAILED LOGIN IP1 (forwarded for [IP2]) to IP-SERVER:143[imap] as jordi.galenics.com [on line 275 of "/wwwroot/horde-2.1/imp/lib/IMP.php"] ene 20 18:07:55 HORDE [error] [imp] FAILED LOGIN IP1 (forwarded for [IP2]) to IP-SERVER:110[pop3] as jordi.galenics.com [on line 275 of "/wwwroot/horde-2.1/imp/lib/IMP.php"] I have test de IMAP connection and It's works fine. (telnet localhost 143) (telnet IP-SERVER 143) from the server machine and from the remote internet machine. Thanks in advanced, Jordi. From eric.rostetter at physics.utexas.edu Mon Jan 20 13:09:52 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Mon Jan 20 11:10:05 2003 Subject: [horde] Horde configuration ?? In-Reply-To: <1043057014.56520772e8cbf@messagerie2> References: <1043057014.56520772e8cbf@messagerie2> Message-ID: <1043089792.d5a7685e2e95b@mail.ph.utexas.edu> Quoting Eric Piollet : > For me @ are : firstname.surname@mycompagny.fr > > I would to have in the horde page: welcome firstname surname (instead of > welcome userid) I think if you set the Fullname in your IMP preferences then that will shou up here instead of the username@domain format. > In my passwd file i have : username ,..., complete name ( firstname surname) > > How can i configure Horde to read this field (complete name) to have on my > screen : welcome firstname surname I think you want to configure and enable the _prefs_hook_fullname() function in horde/config/hooks.php or imp/config/conf.php (depending on your horde/imp versions). -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From jrkuipers at lauwerscollege.nl Mon Jan 20 21:51:52 2003 From: jrkuipers at lauwerscollege.nl (Jan Kuipers) Date: Mon Jan 20 12:52:02 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla Message-ID: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> Regarding HEAD: When I use Mozilla (1.2.1) or Phoenix (0.5) loading of the summaryscreen is _very_ slow. Accessing Kronolith from the new menu causes the same problem. When using IE6 all works fine!! This problem doesn't generate any errors (PHP nor Horde). Any ideas? -- Jan Kuipers Systeembeheer Lauwers College From wurst at eminenz.ath.cx Mon Jan 20 23:43:25 2003 From: wurst at eminenz.ath.cx (Woerns Urstmann) Date: Mon Jan 20 14:41:53 2003 Subject: [horde] cvs modules descriptions Message-ID: <1043102605.14edbddb57f8f@eminenz.ath.cx> is there some place where i can find a description of all of the cvs modules for horde? like the README when i do a checkout of the source. http://www.horde.org/source/modules.php is missing too much. woerns From dlw at cheesed.com Mon Jan 20 15:32:14 2003 From: dlw at cheesed.com (dlw) Date: Mon Jan 20 15:32:24 2003 Subject: [horde] password no longer recognized Message-ID: <68044500-2CCF-11D7-81C8-0003934CA91E@cheesed.com> Hi, I've been using Horde/Imp/Turba for a while with no problems, yesteday I ran some security updates to apache and now my password is not recognized by horde but I have no problem using a different mail client or logging in otherwise. the horde/test/php script runs fine as do other php scripts I have running apache 1.327 php 4.1.2 horde 2.0 imp 3.0 turba 1.1 Thanks, David From otsenre76 at yahoo.com Mon Jan 20 15:37:24 2003 From: otsenre76 at yahoo.com (=?iso-8859-1?q?Ernesto=20Garcia?=) Date: Mon Jan 20 15:37:29 2003 Subject: [horde] Compile Programs required by HORDE and IMP Message-ID: <20030120233724.86352.qmail@web41509.mail.yahoo.com> Hi How i must configure PHP to use IMP/HORDE ? in other way, wich is the flags when compile php to user IMP/HORDE ?? Thanks Ernesto Garcia --------------------------------- Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now From eric.rostetter at physics.utexas.edu Mon Jan 20 17:59:54 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Mon Jan 20 16:00:03 2003 Subject: [horde] cvs modules descriptions In-Reply-To: <1043102605.14edbddb57f8f@eminenz.ath.cx> References: <1043102605.14edbddb57f8f@eminenz.ath.cx> Message-ID: <1043107194.ad098fcd8c2fb@mail.ph.utexas.edu> Quoting Woerns Urstmann : > is there some place where i can find a description of all of the cvs modules > for horde? like the README when i do a checkout of the source. > http://www.horde.org/source/modules.php is missing too much. > woerns The web link you mention is the place you should be able to find the complete list. I was complete/accurate as of a couple months ago. The only things missing should be recent projects that just got added into CVS. Hopefully someone will update it soon to include the new projects. -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From eric.rostetter at physics.utexas.edu Mon Jan 20 18:05:32 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Mon Jan 20 16:05:37 2003 Subject: [horde] password no longer recognized In-Reply-To: <68044500-2CCF-11D7-81C8-0003934CA91E@cheesed.com> References: <68044500-2CCF-11D7-81C8-0003934CA91E@cheesed.com> Message-ID: <1043107532.4b5d5b134c4d4@mail.ph.utexas.edu> Quoting dlw : > Hi, > I've been using Horde/Imp/Turba for a while with no problems, Good! > I ran some security updates to apache and now my password is not > recognized by horde but I have no problem using a different mail client > or logging in otherwise. Only to apache? How about to php? > the horde/test/php script runs fine as do other php scripts I have > running Apache upgrades shouldn't matter, unless maybe they clobber your certificate files or something. PHP upgrades are a different thing... Only advice without knowing more is try the protocol switches in horde/imp/config/servers.php such as /notls or /novalidatecert since the upgrade may have changed authentication processs or certificates. -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From slusarz at bigworm.colorado.edu Mon Jan 20 17:51:38 2003 From: slusarz at bigworm.colorado.edu (Michael M Slusarz) Date: Mon Jan 20 16:51:44 2003 Subject: [horde] Compile Programs required by HORDE and IMP In-Reply-To: <20030120233724.86352.qmail@web41509.mail.yahoo.com> References: <20030120233724.86352.qmail@web41509.mail.yahoo.com> Message-ID: <1043110298.18b87eb1213d8@bigworm.colorado.edu> Quoting Ernesto Garcia : | | Hi | | How i must configure PHP to use IMP/HORDE ? in other way, wich is the | flags when compile php to user IMP/HORDE ?? horde/docs/INSTALL imp/docs/INSTALL michael ______________________________________________ Michael Slusarz [slusarz@bigworm.colorado.edu] The University of Colorado at Boulder From eculp at encontacto.net Mon Jan 20 17:10:24 2003 From: eculp at encontacto.net (eculp@encontacto.net) Date: Mon Jan 20 17:10:28 2003 Subject: [horde] Compile Programs required by HORDE and IMP In-Reply-To: <20030120233724.86352.qmail@web41509.mail.yahoo.com> References: <20030120233724.86352.qmail@web41509.mail.yahoo.com> Message-ID: <1043111424.149b63aea4342@mail.encontacto.net> Quoting Ernesto Garcia : | | Hi | | How i must configure PHP to use IMP/HORDE ? in other way, wich is the flags | when compile php to user IMP/HORDE ?? | | Thanks | Ernesto, I'm using cvs with the head version of php but if you download the source 4.3 tarball from php.net it should be the same. I just go in to the php directory and do # ./buildconf # ./configure --with-apxs=/usr/local/sbin/apxs --with-tsrm-pth --enable-ctype --with-config-file-path=/usr/local/etc --enable-versioning --with-regex=system --with-gd=/usr/local --enable-gd-native-ttf --with-freetype-dir=/usr/local --with-jpeg-dir=/usr/local --with-png-dir=/usr/local --with-zlib --with-mcrypt=/usr/local --with-mhash=/usr/local --with-pdflib=/usr/local --with-zlib-dir=/usr --with-jpeg-dir=/usr/local --with-png-dir=/usr/local --with-tiff-dir=/usr/local --with-imap=/usr/local --enable-mime-magic --with-mysql=/usr/local --with-pgsql=/usr/local --with-sockets --with-ldap=/usr/local --with-openssl=/usr --with-expat-dir=/usr/local --with-dom=/usr/local --enable-ftp --with-gettext=/usr/local --with-iconv=/usr/local --enable-mbstring --with-mcal=/usr/local --with-ming=/usr/local --prefix=/usr/local all on one line, or stick it in a file to be able to change it easier later. The above is for apache13 if you have apache2 you would add a 2 to apxs --with-apxs2=. . . . you will also need the corresponding libraries already installed. Than after configure I just do # make install It usually works. provecho y suerte, ed ------------------------------------------------- From mlist.horde at finansium.fi Tue Jan 21 09:06:05 2003 From: mlist.horde at finansium.fi (MiikaT) Date: Mon Jan 20 23:06:31 2003 Subject: [horde] db differencies between horde 2.1 and 2.2 Message-ID: Hi, can I use my current horde 2.1 db with horde 2.2 and skip the database script step in installation? -MiikaT From jrkuipers at lauwerscollege.nl Tue Jan 21 09:10:55 2003 From: jrkuipers at lauwerscollege.nl (Jan Kuipers) Date: Tue Jan 21 00:11:01 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> Message-ID: <1043136655.4a26743b7ffed@horde.lauwerscollege.nl> Citeren Jan Kuipers : > Regarding HEAD: > When I use Mozilla (1.2.1) or Phoenix (0.5) loading of the summaryscreen is > _very_ slow. Accessing Kronolith from the new menu causes the same problem. > When using IE6 all works fine!! > This problem doesn't generate any errors (PHP nor Horde). > Any ideas? > > -- > Jan Kuipers > Systeembeheer Lauwers College > > > -- > Horde mailing list > Frequently Asked Questions: http://horde.org/faq/ > To unsubscribe, mail: horde-unsubscribe@lists.horde.org > -- Jan Kuipers Systeembeheer Lauwers College From jrkuipers at lauwerscollege.nl Tue Jan 21 09:21:21 2003 From: jrkuipers at lauwerscollege.nl (Jan Kuipers) Date: Tue Jan 21 00:21:26 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> Message-ID: <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> Citeren Jan Kuipers : > Regarding HEAD: > When I use Mozilla (1.2.1) or Phoenix (0.5) loading of the summaryscreen is > _very_ slow. Accessing Kronolith from the new menu causes the same problem. > When using IE6 all works fine!! > This problem doesn't generate any errors (PHP nor Horde). > Any ideas? (previous post got messed up) FYI: Using Moz and Phoenix causes no extra serverload or clientload. Moz just freezes for a couple of seconds and then loads the page normally. -- Jan Kuipers Systeembeheer Lauwers College From jan at horde.org Tue Jan 21 10:43:01 2003 From: jan at horde.org (Jan Schneider) Date: Tue Jan 21 01:43:22 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> Message-ID: <1043142181.3fc78679eb563@jan.dip.ammma.net> Zitat von Jan Kuipers : > Citeren Jan Kuipers : > > > Regarding HEAD: > > When I use Mozilla (1.2.1) or Phoenix (0.5) loading of the > summaryscreen is > > _very_ slow. Accessing Kronolith from the new menu causes the same > problem. > > When using IE6 all works fine!! > > This problem doesn't generate any errors (PHP nor Horde). > > Any ideas? > > (previous post got messed up) > > FYI: Using Moz and Phoenix causes no extra serverload or clientload. Moz > just > freezes for a couple of seconds and then loads the page normally. Then it's just the rendering. We know that from good ol' Netscape, don't we? :-) Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From jan at horde.org Tue Jan 21 11:46:17 2003 From: jan at horde.org (Jan Schneider) Date: Tue Jan 21 02:46:36 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> Message-ID: <1043145977.2b4312c11eb40@jan.dip.ammma.net> Zitat von David Chang : > ?????? Jan Schneider : > > > Zitat von David Chang : > > > > > Hi all: > > > Today i update horde via cvs,I make these changes > > > 1.Set horde/config/nls.php > > > $nls['conf']['enable_utf'] = true ; > > > 2.Chang php.ini like this: > > > mbstring.language = Chinese > > > mbstring.internal_encoding = UTF-8 > > > mbstring.http_input = auto > > > mbstring.http_output = UTF-8 > > > mbstring.func_overload = 7 > > > > These ini settings aren't necessary anymore if you enable utf-8 > support. > > > > > 3.Restart apache+php 4.3 > > > > > > After login into horde ,some places look right with Chinese format > ,but > > > some > > > are not.I thought maybe mb_string not be used in some place,so cause > such > > > problem. > > > There are > > > > > > 1.imp->option->Personal Information. > > > (Original data stored in Mysql with BIG-5 format) > > > 2.nag/mnemo/kronolith's category name. > > > (Original data stored in Mysql with BIG-5 format) > > > 3.Calendar's name,Notepad's name & Task Lists's name > > > (Original data stored in Mysql with BIG-5 format) > > > > These are stored in the preferences. Should be fixed now. > > after update via cvs,this morning > 1. charset problem fixed,but original personal information were lost. > 2. Fixed. > 3. Calendar's name,Notepad's name & Task Lists's name still in wrong > format. > > mean while some problems were found,there are: > a. Original filter rule in IMP were lost. All these problems (1-3 + a) depend on the fact that some data get stored serialized. This is a general "problem" so I ask this to all developers: As mentioned earlier it seems to be save to store "raw" serialized data in the storage backends as PHP doesn't seem to have any problems unserializing even multibyte strings. Storing the serialized data unconverted into the backend has advantages as well as disadvantages to converting the data to the backend's internal charset before storing it: Advantage: Every data can be stored, no matter what charset the current user has. Disavantage: The data get broken as soon as the user changes his charset, for example by switching the translation or by the admin turning utf support on. What do we want to do? > b. Some of mail's subject,body still in wrong format in IMP even they > were send > through in Chinese format via Yahoo webmail. Please ref > http://www.thbuo.gov.tw/~txg16/tmp/920120.jpg ,also i have attached one > of > these mail . These messages (at least the one you attached) have invalid message headers. Email headers containing non-7bit characters have to be mime encoded before being passed to the mta. If they don't the result is unpredictable. My imap server (Cyrus) for example replace all non-7bit characters with "X". You were able to read these headers in the past because you happened to have the same charset as the people sending you the message. > c. Chinese folders does not look correct after UTF-8 used.Can IMP > automaticly > handle folder name to transfer into UTF-8 ? Or user got manualy rename > every > folder name one by one ? This should work automatically. I didn't have any problems creating Chinese named folders here with IMP or with other MUAs and seeing them correctly displayed in IMP. I use some new features of the mbstring extension to handle this, but if it doesn't work (because your PHP is too old), it should fall back to the old encoding method. That means if you used to be able to create Chinese folder names you still should. If you never were but want to do so, you should upgrade your PHP. Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From jrkuipers at lauwerscollege.nl Tue Jan 21 11:09:23 2003 From: jrkuipers at lauwerscollege.nl (Jan Kuipers) Date: Tue Jan 21 03:50:08 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043142181.3fc78679eb563@jan.dip.ammma.net> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> <1043142181.3fc78679eb563@jan.dip.ammma.net> Message-ID: <1043143763.fa77587ca120c@horde.lauwerscollege.nl> Citeren Jan Schneider : > Then it's just the rendering. We know that from good ol' Netscape, don't we? > :-) Is the new menu putting this burden on the rendering? (renderingtime >5 sec), because I didn't notice this at all with the old menu. -- Jan Kuipers Systeembeheer Lauwers College From jan at horde.org Tue Jan 21 13:01:51 2003 From: jan at horde.org (Jan Schneider) Date: Tue Jan 21 04:02:15 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043143763.fa77587ca120c@horde.lauwerscollege.nl> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> <1043142181.3fc78679eb563@jan.dip.ammma.net> <1043143763.fa77587ca120c@horde.lauwerscollege.nl> Message-ID: <1043150511.dd0278ef93ee6@jan.dip.ammma.net> Zitat von Jan Kuipers : > Citeren Jan Schneider : > > > Then it's just the rendering. We know that from good ol' Netscape, > don't we? > > :-) > > Is the new menu putting this burden on the rendering? (renderingtime >5 > sec), > because I didn't notice this at all with the old menu. Renders fine here (< 1 sec.) with the new menu on Mozilla 1.2.1, all apps installed with a Pentium IIIm 1 GHz. Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From donovan at biochem.ucl.ac.uk Tue Jan 21 13:07:01 2003 From: donovan at biochem.ucl.ac.uk (donovan@biochem.ucl.ac.uk) Date: Tue Jan 21 04:58:24 2003 Subject: [horde] Mysql database & horde Message-ID: <1043154421.3e2d45f5b8ed3@webdatab> Hi to you all, I hope you can help me. I have Horde and imp running. I am able to view, send and receive mail. My first problem is when I edit horde.php to use sql as my preferences driver ($conf['prefs']['driver'] = 'sql';) I get a error message. (DB Error: connect failed [line 102 of /www/htdocs/horde/lib/Prefs/sql.php]) At a guess I think it is to do with horde trying to access the database. If i reset it back to ($conf['prefs']['driver'] = 'sessions';) all is fine during login. $conf['prefs']['params']['phptype'] = 'mysql'; $conf['prefs']['params']['hostspec'] = 'localhost'; $conf['prefs']['params']['username'] = 'root'; $conf['prefs']['params']['password'] = 'mypass'; $conf['prefs']['params']['database'] = 'horde'; $conf['prefs']['params']['table'] = 'horde_prefs'; I have looked in mysql and listed the horde database files. -rw-rw---- 1 mysql mysql 8632 Jan 16 18:12 horde_categories_categories.frm -rw-rw---- 1 mysql mysql 0 Jan 16 18:12 horde_categories_categories.MYD -rw-rw---- 1 mysql mysql 1024 Jan 16 18:12 horde_categories_categories.MYI -rw-rw---- 1 mysql mysql 8820 Jan 16 18:12 horde_categories.frm -rw-rw---- 1 mysql mysql 0 Jan 16 18:12 horde_categories.MYD -rw-rw---- 1 mysql mysql 1024 Jan 16 18:12 horde_categories.MYI -rw-rw---- 1 mysql mysql 8668 Jan 16 18:12 horde_prefs.frm -rw-rw---- 1 mysql mysql 0 Jan 16 18:12 horde_prefs.MYD -rw-rw---- 1 mysql mysql 1024 Jan 16 18:12 horde_prefs.MYI -rw-rw---- 1 mysql mysql 8596 Jan 16 18:12 horde_users.frm -rw-rw---- 1 mysql mysql 0 Jan 16 18:24 horde_users.MYD -rw-rw---- 1 mysql mysql 3072 Jan 16 18:27 horde_users.MYI I know when working the prefs.MYD file is updated. My second problem is that I have also used sql for authenticating users to Horde. ($conf['auth']['driver'] = 'sql';) I searched on google and someone else had a simular problem and added this to his horde.php file. $conf['auth']['params'] = array(); $conf['auth']['params']['phptype'] = 'mysql'; $conf['auth']['params']['hostspec'] = 'localhost'; $conf['auth']['params']['username'] = 'horde'; $conf['auth']['params']['password'] = 'mypass'; $conf['auth']['params']['database'] = 'horde'; $conf['auth']['params']['table'] = 'horde_users'; Is the horde_users.MYD file supposed to update when new users log on to horde or other modules? Any pointers will be truly greatfull Donovan...... My horde configuration from the test.php Horde Versions Horde: 2.1 IMP: 3.1 (run IMP tests) PHP Version View phpinfo() screen PHP Version: 4.2.3 PHP Major Version: 4.2 PHP Minor Version: 3 PHP Version Classification: release You are running a supported version of PHP. PHP Module Capabilities FTP Support: No Gettext Support: Yes IMAP Support: Yes LDAP Support: No MCAL Support: No Mcrypt Support: No MySQL Support: Yes PostgreSQL Support: No XML Support: Yes Miscellaneous PHP Settings short_open_tag enabled: Yes magic_quotes_runtime set to Off: Yes file_uploads enabled: Yes PHP Sessions Session counter: 1 To unregister the session: click here PEAR PEAR - Yes Recent PEAR - Yes Mail::RFC822 - Yes Log - Yes DB - Yes ------------------------------------------------- This mail sent through Webmail: http://webdatab From johan_de_vries at bravilor.com Tue Jan 21 14:01:28 2003 From: johan_de_vries at bravilor.com (Johan de Vries) Date: Tue Jan 21 05:02:37 2003 Subject: [horde] Mysql database & horde Message-ID: <09C1D9A36D9C1B4F8E5042A2B0AEFB4C06416B@courtney.bravilor.nl> Edit line 102 of the /www/htdocs/horde/lib/Prefs/sql.php file and delete the IsWarning part This is not supported by the latest version of pear See also the Horde FAQ Johan > -----Oorspronkelijk bericht----- > Van: donovan@biochem.ucl.ac.uk [mailto:donovan@biochem.ucl.ac.uk] > Verzonden: dinsdag 21 januari 2003 14:07 > Aan: horde > Onderwerp: [horde] Mysql database & horde > > > > > > Hi to you all, > > I hope you can help me. I have Horde and imp running. I am > able to view, send > and receive mail. > > My first problem is when I edit horde.php to use sql as my > preferences driver > ($conf['prefs']['driver'] = 'sql';) I get a error message. > > (DB Error: connect failed [line 102 of > /www/htdocs/horde/lib/Prefs/sql.php]) > > At a guess I think it is to do with horde trying to access > the database. If i > reset it back to ($conf['prefs']['driver'] = 'sessions';) > all is fine during > login. > > $conf['prefs']['params']['phptype'] = 'mysql'; > $conf['prefs']['params']['hostspec'] = 'localhost'; > $conf['prefs']['params']['username'] = 'root'; > $conf['prefs']['params']['password'] = 'mypass'; > $conf['prefs']['params']['database'] = 'horde'; > $conf['prefs']['params']['table'] = 'horde_prefs'; > > I have looked in mysql and listed the horde database files. > > -rw-rw---- 1 mysql mysql 8632 Jan 16 18:12 > horde_categories_categories.frm > -rw-rw---- 1 mysql mysql 0 Jan 16 18:12 > horde_categories_categories.MYD > -rw-rw---- 1 mysql mysql 1024 Jan 16 18:12 > horde_categories_categories.MYI > -rw-rw---- 1 mysql mysql 8820 Jan 16 18:12 > horde_categories.frm > -rw-rw---- 1 mysql mysql 0 Jan 16 18:12 > horde_categories.MYD > -rw-rw---- 1 mysql mysql 1024 Jan 16 18:12 > horde_categories.MYI > -rw-rw---- 1 mysql mysql 8668 Jan 16 18:12 > horde_prefs.frm > -rw-rw---- 1 mysql mysql 0 Jan 16 18:12 > horde_prefs.MYD > -rw-rw---- 1 mysql mysql 1024 Jan 16 18:12 > horde_prefs.MYI > -rw-rw---- 1 mysql mysql 8596 Jan 16 18:12 > horde_users.frm > -rw-rw---- 1 mysql mysql 0 Jan 16 18:24 > horde_users.MYD > -rw-rw---- 1 mysql mysql 3072 Jan 16 18:27 > horde_users.MYI > > I know when working the prefs.MYD file is updated. > > My second problem is that I have also used sql for > authenticating users to Horde. > ($conf['auth']['driver'] = 'sql';) > I searched on google and someone else had a simular problem > and added this to > his horde.php file. > > $conf['auth']['params'] = array(); > $conf['auth']['params']['phptype'] = 'mysql'; > $conf['auth']['params']['hostspec'] = 'localhost'; > $conf['auth']['params']['username'] = 'horde'; > $conf['auth']['params']['password'] = 'mypass'; > $conf['auth']['params']['database'] = 'horde'; > $conf['auth']['params']['table'] = 'horde_users'; > > > > Is the horde_users.MYD file supposed to update when new > users log on to > horde or other modules? > > > > Any pointers will be truly greatfull > > Donovan...... > > > > My horde configuration from the test.php > > Horde Versions > > Horde: 2.1 > IMP: 3.1 (run IMP tests) > > > PHP Version > > View phpinfo() screen > PHP Version: 4.2.3 > PHP Major Version: 4.2 > PHP Minor Version: 3 > PHP Version Classification: release > You are running a supported version of PHP. > > PHP Module Capabilities > > FTP Support: No > Gettext Support: Yes > IMAP Support: Yes > LDAP Support: No > MCAL Support: No > Mcrypt Support: No > MySQL Support: Yes > PostgreSQL Support: No > XML Support: Yes > > Miscellaneous PHP Settings > > short_open_tag enabled: Yes > magic_quotes_runtime set to Off: Yes > file_uploads enabled: Yes > > PHP Sessions > > Session counter: 1 > To unregister the session: click here > > PEAR > > PEAR - Yes > Recent PEAR - Yes > Mail::RFC822 - Yes > Log - Yes > DB - Yes > > > ------------------------------------------------- > This mail sent through Webmail: http://webdatab > > -- > Horde mailing list > Frequently Asked Questions: http://horde.org/faq/ > To unsubscribe, mail: horde-unsubscribe@lists.horde.org > From schimkat at musik.auc.dk Tue Jan 21 15:14:26 2003 From: schimkat at musik.auc.dk (=?ISO-8859-1?Q?S=F8ren_Schimkat?=) Date: Tue Jan 21 06:12:32 2003 Subject: [horde] Open IMP composer from aother application Message-ID: <3E2D55C2.6030003@musik.auc.dk> Hi everyone I'm in the middle of writing a new Horde plugin - and I need to open the IMP mail composer window from within this new plugin. Please tell me how to do this. Regards S?ren Schimkat From chuck at horde.org Tue Jan 21 10:33:05 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Tue Jan 21 07:35:29 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043143763.fa77587ca120c@horde.lauwerscollege.nl> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> <1043142181.3fc78679eb563@jan.dip.ammma.net> <1043143763.fa77587ca120c@horde.lauwerscollege.nl> Message-ID: <1043163185.8718f166e64e8@marina.horde.org> Quoting Jan Kuipers : > Is the new menu putting this burden on the rendering? (renderingtime >5 > sec), because I didn't notice this at all with the old menu. It's probably more intensive, yes, but you should only have to load the menu once... -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From chuck at horde.org Tue Jan 21 10:59:33 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Tue Jan 21 08:02:00 2003 Subject: [horde] Open IMP composer from aother application In-Reply-To: <3E2D55C2.6030003@musik.auc.dk> References: <3E2D55C2.6030003@musik.auc.dk> Message-ID: <1043164773.f4cdce62dc96e@marina.horde.org> Quoting S?ren Schimkat : > I'm in the middle of writing a new Horde plugin - and I need to open the > IMP mail composer window from within this new plugin. > > Please tell me how to do this. Please tell us what versions of Horde and IMP you're using. -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From chuck at horde.org Tue Jan 21 11:04:17 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Tue Jan 21 08:06:41 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043145977.2b4312c11eb40@jan.dip.ammma.net> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> Message-ID: <1043165057.a8c1586790718@marina.horde.org> Quoting Jan Schneider : > Storing the serialized data unconverted into the backend has advantages > as well as disadvantages to converting the data to the backend's internal > charset before storing it: > Advantage: Every data can be stored, no matter what charset the current > user has. > Disavantage: The data get broken as soon as the user changes his charset, > for example by switching the translation or by the admin turning utf > support on. That seems like a pretty compelling argument for converting the charset when storing it; someone could easily have a reason to change languages regularly when using Horde apps. -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From jan at horde.org Tue Jan 21 17:23:35 2003 From: jan at horde.org (Jan Schneider) Date: Tue Jan 21 08:23:52 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043165057.a8c1586790718@marina.horde.org> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> <1043165057.a8c1586790718@marina.horde.org> Message-ID: <1043166215.758702265644b@jan.dip.ammma.net> Zitat von Chuck Hagenbuch : > Quoting Jan Schneider : > > > Storing the serialized data unconverted into the backend has advantages > > as well as disadvantages to converting the data to the backend's > internal > > charset before storing it: > > Advantage: Every data can be stored, no matter what charset the current > > user has. > > Disavantage: The data get broken as soon as the user changes his > charset, > > for example by switching the translation or by the admin turning utf > > support on. > > That seems like a pretty compelling argument for converting the charset > when > storing it; someone could easily have a reason to change languages > regularly > when using Horde apps. What do others think? Just to make it clear: This of causes only problems if the user switches between languages with _different_ charsets that are _not_ ascii. Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From efetepe at efetepe.com Tue Jan 21 17:35:32 2003 From: efetepe at efetepe.com (EFETEPE MANAGER) Date: Tue Jan 21 08:27:44 2003 Subject: [horde] IMP Login Problem : Couldn't open stream References: <01f001c2c0b3$a25edc80$0a01a8c0@SERVER> <1043088070.3e2c42c6557d7@webemail.bsd.uchicago.edu> Message-ID: <02bd01c2c16b$1ece1940$0a01a8c0@SERVER> Hi again, I have a problem with IMP Login, When I try login the following error occur: server="localhost" user="the_user_name" mailbox="{localhost:143}INBOX" Warning: Couldn't open stream {localhost:143}INBOX in /wwwroot/horde/imp/test.php on line 166 Warning: imap_mailboxmsginfo(): supplied argument is not a valid imap resource in /wwwroot/horde/imp/test.php on line 169 INBOX has messages ( new recent) Warning: imap_close(): supplied argument is not a valid imap resource in /wwwroot/horde/imp/test.php on line 171 I have change the test.php file and I have try connect without parameters writing de corrects values in the imap connection function and all It was useless. I need help to help it !!! I can connect to IMAP server whit other methods, telnet IP_SERVER 143, with other WebMail services with my server values and I have connect from remote machine using OutLook Express with IMAP Account !!!! I think that it's possible connect usgin OutLook Express I'll can connect using IMP without problem, or not ? Software and Server Information: Horder 2.1 IMP 3.1 PHP 4.2.3 (I've tryed 4.1.1, 4.2.1 and 4.3.0) Truba 1.1 IMAP 2001a-10 (and devel rpm) OPENSSL-0.9.6b-28 (and devel rpm) KERBEROS: krb5-libs-1.2.2-13 krb5-workstation-1.2.2-13 pam_krb5-1.46-1 krb5-server-1.2.2-13 krb5-devel-1.2.2-13 PAM-0.75-19: pam_krb5-1.46-1 pam-0.75-19 pam-devel-0.75-19 PHP Configuration command: ./configure --prefix=/usr/local/php --with-mysql --with-apache=/usr/local/a pache --enable-track-vars --with-imap --with-kerberos --with-openssl --enab le-ftp --with-imap-ssl --with-gettext --enable-mbstring --enable-mbstr-enc-t rans --enable-mbregex Apache Configuration Command: ./configure --prefix=/usr/local/apache --enable-module=proxy --activate-modu le=src/modules/php4/libphp4.a Thanks in advanced, Jordi. ----- Original Message ----- From: "Ian Miller" To: "EFETEPE MANAGER" Sent: Monday, January 20, 2003 7:41 PM Subject: Re: [imp] Can you Help me whit IMP Problem Try and copy horde-2.1 to horde and run it from their Quoting EFETEPE MANAGER : > Hello I'm Jordi from Tarragona - Catalunya - Spain > > I have a IMP problem when try connect to IMAP the server tell me: > > Couldn't open stream {localhost:143/imap}INBOX in > /wwwroot/horde-2.1/imp/test.php on line 160 > > Couldn't open stream {localhost:110/pop3}INBOX in > /wwwroot/horde-2.1/imp/test.php on line 160 > > I have test connection via localhost and IP. I have test diferents versions > of PHP (php-4.1.1, php-4.2.1 and php-4.2.3) > From secabeen at pobox.com Tue Jan 21 08:38:02 2003 From: secabeen at pobox.com (Ted Cabeen) Date: Tue Jan 21 08:38:06 2003 Subject: [horde] db differencies between horde 2.1 and 2.2 In-Reply-To: References: Message-ID: <20030121163802.7CC225A@gray.impulse.net> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Content-Type: text/plain; charset=us-ascii In message , "MiikaT" wr ites: >can I use my current horde 2.1 db with horde 2.2 and skip the database >script step in installation? I did a 2.1->2.2 upgrade last night and the 2.1 database worked fine in 2.2. I'm not doing anything special with the horde db, so YMMV, but I had no problems. - -- Ted Cabeen http://www.pobox.com/~secabeen ted@impulse.net Check Website or Keyserver for PGP/GPG Key BA0349D2 secabeen@pobox.com "I have taken all knowledge to be my province." -F. Bacon secabeen@cabeen.org "Human kind cannot bear very much reality."-T.S.Eliot cabeen@netcom.com -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (FreeBSD) Comment: Exmh version 2.5 07/13/2001 iD8DBQE+LXdqoayJfLoDSdIRAo7cAKC937lfi8Isg81uq4SvHuf84Tq0NwCfZ37x Xmdnpue6NbwYGVGaTkVNr44= =0hkc -----END PGP SIGNATURE----- From me at danielreich.com Tue Jan 21 01:17:42 2003 From: me at danielreich.com (Daniel Reich) Date: Tue Jan 21 08:40:11 2003 Subject: [horde] Using curl wrappers instead of fopen Message-ID: <1043129861.2333.105.camel@localhost> I've been using Horde for a while but this is my first input. On my setup, I enforce a rather strict security policy at the firewall. I allow the webserver to open ports to nowhere except if authenticated or I allow a specific IP. That being said, http out to the world is closed by default. One can make arguments for and against this policy but that's another discussion for a different mail list. Anyways, I'm not up to speed on where to submit code so if I'm wrong, please accept my apologies and turn me in the correct direction. I'd like to offer up an alternative to using fopen. Granted curl is yet another module to install, but I think it'd be useful. I wrote a quick function that uses curl to grab a URL via proxy (authenticated too). I thought this could go into the Horde library. And if this is ok, I'd like to write another function which will act as a wrapper so that if you have curl extensions installed it will use curl, otherwise it will use fopen. Other horde modules could utilize this to pull down lots of URLs (ie Jonah). I should probably extend this to handle cookies in some fashion too now that I'm looking back... /** * * Open a URL using curl extension (if its installed) and return the output. * * @access public * @param string $url The URL to fetch * * @return string The output of the URL we fetched */ function curlOutput($url) { global $conf; if (is_null($url)) { return false; } // maybe this should return a more voiceful error to help the user? if (!extension_loaded('curl')) { return false; } $ch = curl_init(); curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1); curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1); if (isset($conf['curl']['proxy'])) { curl_setopt($ch, CURLOPT_PROXY, $conf['curl']['proxy']); } if (isset($conf['curl']['auth'])) { curl_setopt($ch, CURLOPT_PROXYUSERPWD, $conf['curl']['auth']); curl_setopt($ch, CURLOPT_USERPWD, $conf['curl']['auth']); } // Try 5 times to fetch URL for ($i=0;((curl_getinfo($ch, CURLINFO_HTTP_CODE)!=200)&&($i<5));$i++) { $ce = curl_exec($ch); } if (curl_getinfo($ch, CURLINFO_HTTP_CODE)!=200) { echo 'http error -' . curl_getinfo($ch, CURLINFO_HTTP_CODE) . '- '; curl_close($ch); return false; } curl_close($ch); return $ce; } and then to use this, we just need to add the following to horde/config/conf.php /** ** Horde CURL Settings **/ // If Horde should use a proxy server when retrieving remote URLs, // What is the IP and port to use? The format should be IPAddress:Port // Example: '192.168.1.1:8080' $conf['curl']['proxy'] = ""; // If the proxy server requires authentication, or if you are running // a transparent proxy server that will authenticate, enter the // credentials here. The format is username:password. Example: // 'horde:mypass'. $conf['curl']['auth'] = ""; From jan at horde.org Tue Jan 21 17:50:42 2003 From: jan at horde.org (Jan Schneider) Date: Tue Jan 21 08:51:07 2003 Subject: [horde] Using curl wrappers instead of fopen In-Reply-To: <1043129861.2333.105.camel@localhost> References: <1043129861.2333.105.camel@localhost> Message-ID: <1043167842.4aeb1f53114a9@jan.dip.ammma.net> Zitat von Daniel Reich : > I'd like to offer up an alternative to using fopen. Granted curl is yet > another module to install, but I think it'd be useful. I wrote a quick > function that uses curl to grab a URL via proxy (authenticated too). > > I thought this could go into the Horde library. And if this is ok, I'd > like to write another function which will act as a wrapper so that if > you have curl extensions installed it will use curl, otherwise it will > use fopen. Other horde modules could utilize this to pull down lots of > URLs (ie Jonah). I should probably extend this to handle cookies in > some fashion too now that I'm looking back... You should take a look at Snoopy.php in horde/lib. IIRC it currently uses the curl command line interface but it probably can be extended to use the extension if available. Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From eric.rostetter at physics.utexas.edu Tue Jan 21 11:00:38 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Tue Jan 21 09:00:43 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043166215.758702265644b@jan.dip.ammma.net> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> <1043165057.a8c1586790718@marina.horde.org> <1043166215.758702265644b@jan.dip.ammma.net> Message-ID: <1043168438.45b6c392e4406@mail.ph.utexas.edu> Quoting Jan Schneider : > Just to make it clear: This of causes only problems if the user switches > between languages with _different_ charsets that are _not_ ascii. No comment on the coding issue, but just a reinforcment of the need. A student who works for me is asian. He prefers to read his mail in zh_TW. When he sits down at a machine/browser that supports zh_TW (which not all do), then he logs into Horde with zh_TW. When he sits down at a machine/browser that doesn't support zh_TW, which happens often, he logs into Horde with English. In both cases, he would like to see as much as possible presented to him in the correct charset. So this situation is a real world common situation. > Jan. -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From jan at horde.org Tue Jan 21 18:12:30 2003 From: jan at horde.org (Jan Schneider) Date: Tue Jan 21 09:12:44 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043168438.45b6c392e4406@mail.ph.utexas.edu> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> <1043165057.a8c1586790718@marina.horde.org> <1043166215.758702265644b@jan.dip.ammma.net> <1043168438.45b6c392e4406@mail.ph.utexas.edu> Message-ID: <1043169150.c38ce2327137a@jan.dip.ammma.net> Zitat von Eric Rostetter : > Quoting Jan Schneider : > > > Just to make it clear: This of causes only problems if the user > switches > > between languages with _different_ charsets that are _not_ ascii. > > No comment on the coding issue, but just a reinforcment of the need. > > A student who works for me is asian. He prefers to read his mail in > zh_TW. When he sits down at a machine/browser that supports zh_TW (which > not all do), then he logs into Horde with zh_TW. When he sits down at > a machine/browser that doesn't support zh_TW, which happens often, he > logs into Horde with English. In both cases, he would like to see as > much > as possible presented to him in the correct charset. That's why I excluded ascii from being problematic. English can always be used savely. But I got the point. The user should always get the same data, no matter what client he uses. Even if some of his data isn't compatible with the system's backend. It won't be always then, no matter which browser he choose to access it. Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From eric.rostetter at physics.utexas.edu Tue Jan 21 11:27:27 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Tue Jan 21 09:27:31 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043169150.c38ce2327137a@jan.dip.ammma.net> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> <1043165057.a8c1586790718@marina.horde.org> <1043166215.758702265644b@jan.dip.ammma.net> <1043168438.45b6c392e4406@mail.ph.utexas.edu> <1043169150.c38ce2327137a@jan.dip.ammma.net> Message-ID: <1043170047.7444678b0f64e@mail.ph.utexas.edu> Quoting Jan Schneider : > > A student who works for me is asian. He prefers to read his mail in > > zh_TW. When he sits down at a machine/browser that supports zh_TW (which > > not all do), then he logs into Horde with zh_TW. When he sits down at > > a machine/browser that doesn't support zh_TW, which happens often, he > > logs into Horde with English. In both cases, he would like to see as > > much > > as possible presented to him in the correct charset. > > That's why I excluded ascii from being problematic. English can always be > used savely. Ah, I thought you just meant it was okay two switch between any two ascii sets. You mean between ascii and something else. Well, it doesn't apply in this case, but it could easily have been a story about zh_CN and zh_TW (he reads both of those)... > But I got the point. Yeah, even though I missed it ;) -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From ftrudeau at cam.org Tue Jan 21 13:33:56 2003 From: ftrudeau at cam.org (Frederic Trudeau) Date: Tue Jan 21 10:34:21 2003 Subject: [horde] Horde session 'emulation' ? Message-ID: <005701c2c17b$a84ea620$4c05000a@elbasta> Greetings. I installed Horde/Imp/Turba as part of a webmail application for our members, as small non for profit ISP located in Montreal. I also created a 'Your Account' section, which is displaying dial-up users disk sapce usage, time usage, and provide other usefull tools. Now, a majority of our users are using this application. What I would like to do, is emulate/create a valid Horde session every time a user successfully logs on this on-line application, so that I can simply add an external link to the webmail. Users would then not have to re-log on. Any pointers on how to achieve this ? --------------------------------------------------- Frederic Trudeau PHP Coder, Colocation, Development ftrudeau@cam.org 514.529.3000 ext. 246 From eric.rostetter at physics.utexas.edu Tue Jan 21 12:44:12 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Tue Jan 21 10:44:18 2003 Subject: [horde] Horde session 'emulation' ? In-Reply-To: <005701c2c17b$a84ea620$4c05000a@elbasta> References: <005701c2c17b$a84ea620$4c05000a@elbasta> Message-ID: <1043174652.a6b8d311b902a@mail.ph.utexas.edu> Quoting Frederic Trudeau : > Greetings. I installed Horde/Imp/Turba as part of a webmail application for > our members, as small non for profit ISP located in Montreal. I also created > a 'Your Account' section, which is displaying dial-up users disk sapce > usage, time usage, and provide other usefull tools. Now, a majority of our > users are using this application. > > What I would like to do, is emulate/create a valid Horde session every time > a user successfully logs on this on-line application, so that I can simply > add an external link to the webmail. Users would then not have to re-log on. > > Any pointers on how to achieve this ? 1) There is a horde module to display account info (accounts, part of sork) which might be of interest to you. (Or then again, maybe not). 2) For the other part, see imp/scripts/custom_login.php, imp/redirect.php, and the mailing list archives. -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From derek at younet.okstate.edu Tue Jan 21 16:06:07 2003 From: derek at younet.okstate.edu (Derek Martin) Date: Tue Jan 21 14:06:42 2003 Subject: [horde] Sessions Expiring Message-ID: Do sessions expire after some preset time set in some HORDE or IMP setting?? I am using all stable prod versions of HORDE and family and IMP is doing the logins ??? From jpm at klausi-hh.de Tue Jan 21 22:44:52 2003 From: jpm at klausi-hh.de (=?iso-8859-1?Q?Jens_Peter_M=F6ller?=) Date: Tue Jan 21 14:19:33 2003 Subject: [horde] Name of INBOX Message-ID: <034301c2c196$55e59680$19a8a8c0@jpmwin02> Hi, we using Horde only with german language and all folders (sent items, ...) have german names. So I wan't change the Name of the INBOX too? Maybe the displayed name? We using uw-imap. JPM From slusarz at bigworm.colorado.edu Tue Jan 21 15:36:14 2003 From: slusarz at bigworm.colorado.edu (Michael M Slusarz) Date: Tue Jan 21 14:36:51 2003 Subject: [horde] Name of INBOX In-Reply-To: <034301c2c196$55e59680$19a8a8c0@jpmwin02> References: <034301c2c196$55e59680$19a8a8c0@jpmwin02> Message-ID: <1043188574.c1cb01592996e@bigworm.colorado.edu> Quoting Jens Peter M?ller : | Hi, | | we using Horde only with german language and | all folders (sent items, ...) have | german names. | So I wan't change the Name of the INBOX too? | Maybe the displayed name? | We using uw-imap. INBOX can not be changed. See RFC 2060 [5.1]: The interpretation of mailbox names is implementation-dependent. However, the case-insensitive mailbox name INBOX is a special name reserved to mean "the primary mailbox for this user on this server". michael ______________________________________________ Michael Slusarz [slusarz@bigworm.colorado.edu] The University of Colorado at Boulder From s-beutel at gmx.de Wed Jan 22 00:03:49 2003 From: s-beutel at gmx.de (s-beutel@gmx.de) Date: Tue Jan 21 15:03:56 2003 Subject: [horde] IMP Login Problem : Couldn't open stream References: <02bd01c2c16b$1ece1940$0a01a8c0@SERVER> Message-ID: <7248.1043190229@www23.gmx.net> > Hi again, > > I have a problem with IMP Login, When I try login the following error > occur: > > server="localhost" user="the_user_name" mailbox="{localhost:143}INBOX" > Warning: Couldn't open stream {localhost:143}INBOX in > /wwwroot/horde/imp/test.php on line 166 > Warning: imap_mailboxmsginfo(): supplied argument is not a valid imap > resource in /wwwroot/horde/imp/test.php on line 169 > INBOX has messages ( new recent) > Warning: imap_close(): supplied argument is not a valid imap resource > in > /wwwroot/horde/imp/test.php on line 171 Any errors at the /horde/test.php? Esp. PEAR errors? Which IMAP server are you running? Sebastian From s-beutel at gmx.de Wed Jan 22 00:32:26 2003 From: s-beutel at gmx.de (s-beutel@gmx.de) Date: Tue Jan 21 15:32:33 2003 Subject: [horde] Name of INBOX References: <1043188574.c1cb01592996e@bigworm.colorado.edu> Message-ID: <28308.1043191946@www23.gmx.net> > INBOX can not be changed. See RFC 2060 [5.1]: > > The interpretation of mailbox names is implementation-dependent. > However, the case-insensitive mailbox name INBOX is a special name > reserved to mean "the primary mailbox for this user on this server". > > michael Well... but I think nobody cares for another display language at the frontend (in fact, most mail clients use the appropriate translation for INBOX) - of course the folder at the server should be named INBOX. As with IMP 3.1, in the de_DE.po, the correct translation for INBOX can be found. I do not know why this doesn't work for you... Sebastian From david at thbuo.gov.tw Wed Jan 22 11:55:38 2003 From: david at thbuo.gov.tw (David Chang) Date: Tue Jan 21 19:52:16 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043145977.2b4312c11eb40@jan.dip.ammma.net> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> Message-ID: <1043207738.cb7283089228b@webmail.thbuo.gov.tw> 引用 Jan Schneider : > > c. Chinese folders does not look correct after UTF-8 used.Can IMP > > automaticly > > handle folder name to transfer into UTF-8 ? Or user got manualy rename > > every > > folder name one by one ? > > This should work automatically. I didn't have any problems creating Chinese > named folders here with IMP or with other MUAs and seeing them correctly > displayed in IMP. > I use some new features of the mbstring extension to handle this, but if it > doesn't work (because your PHP is too old), it should fall back to the old > encoding method. > > That means if you used to be able to create Chinese folder names you still > should. If you never were but want to do so, you should upgrade your PHP. > > Jan. Hi Jan: Folders that created (before UTF-8 enable) with Chinese format ,did not display in Chinese format since UTF-8 was enabled.I thnk my PHP should the new enough (PHP 4.3.0).So, what should i do ? Anyway ,thank you & Horde core term ! David Chang From derek at younet.okstate.edu Tue Jan 21 23:27:51 2003 From: derek at younet.okstate.edu (Derek Martin) Date: Tue Jan 21 21:28:09 2003 Subject: [horde] Login Check Message-ID: <001201c2c1d7$03917930$9bf20c44@DerekMartin> Hi there, I have a curious question about HORDE (IMP) authentication. I am using CURL to bypass the IMP login screen by using another login system that does some other stuff too. It works great, moooost of the time. However, randomly, the login is failing to function properly, reason not known yet but wrong password isn't the problem. However, even in a login failed situation, a session is still created and returned to my curl script. My question is that is there a way to confirm by some method in HORDE to verify that the login was successful - in my other systems I can call a method isUserLoggedIn() and that works great but as yet, haven't isolated one from HORDE...anyone have any thoughts? Derek Martin YOU Networks Administrator http://you.okstate.edu derek@younet.okstate.edu -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3234 bytes Desc: not available Url : http://lists.horde.org/archives/horde/attachments/20030121/a0399eef/smime.bin From eric.rostetter at physics.utexas.edu Tue Jan 21 23:33:12 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Tue Jan 21 21:33:17 2003 Subject: [horde] Login Check In-Reply-To: <001201c2c1d7$03917930$9bf20c44@DerekMartin> References: <001201c2c1d7$03917930$9bf20c44@DerekMartin> Message-ID: <1043213592.be5fcc065ec61@mail.ph.utexas.edu> Quoting Derek Martin : > My question is that is there a way to confirm by some method in HORDE to > verify that the login was successful - in my other systems I can call a > method isUserLoggedIn() and that works great but as yet, haven't > isolated one from HORDE...anyone have any thoughts? Horde::getAuth() -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From schimkat at musik.auc.dk Wed Jan 22 09:19:08 2003 From: schimkat at musik.auc.dk (=?UTF-8?B?U8O4cmVuIFNjaGlta2F0?=) Date: Wed Jan 22 00:17:15 2003 Subject: [horde] Open IMP composer from aother application References: <3E2D55C2.6030003@musik.auc.dk> <1043164773.f4cdce62dc96e@marina.horde.org> Message-ID: <3E2E53FC.8050101@musik.auc.dk> Hi Chuck Whups... my mistake. I'm using Horde V2.0 and Imp V3.0 Regards S?ren Chuck Hagenbuch wrote: > Quoting S?ren Schimkat : > > >>I'm in the middle of writing a new Horde plugin - and I need to open the >>IMP mail composer window from within this new plugin. >> >>Please tell me how to do this. > > > Please tell us what versions of Horde and IMP you're using. > > -chuck > > -- > Charles Hagenbuch, > must ... find ... acorns ... *thud* > From jpm at klausi-hh.de Wed Jan 22 10:37:25 2003 From: jpm at klausi-hh.de (=?iso-8859-1?Q?Jens_Peter_M=F6ller?=) Date: Wed Jan 22 01:46:26 2003 Subject: [horde] Name of INBOX References: <1043188574.c1cb01592996e@bigworm.colorado.edu> <28308.1043191946@www23.gmx.net> Message-ID: <003001c2c1fa$86d3fde0$19a8a8c0@jpmwin02> > As with IMP 3.1, in the de_DE.po, the correct translation for INBOX can be > found. I do not know why this doesn't work for you... OK, it works for the button but not for the displayed folders. Where can I look at the code to set translation in the folder view? JPM From garycnew at yahoo.com Wed Jan 22 02:26:51 2003 From: garycnew at yahoo.com (Gary C. New) Date: Wed Jan 22 02:26:55 2003 Subject: [horde] Sieve-IMP Patch Message-ID: <20030122102651.26113.qmail@web12501.mail.yahoo.com> I recently discovered the sieve-imp patch that enables sieve capable mail servers to include an auto reply option with IMP. I got the patch installed and it shows up fine under IMP options, but when trying to add an auto reply it does not do anything (not even invoke the sieve-service). I've tested my sieve install outside of IMP and it seems to be working fine (telneting in on port 2000 generates some syslog entries for seive). IMP should at least create a raw socket connection with the sieve service, but does not according to the syslogs. I'm using the latest stable release of IMP-3.1. Does anyone else have this patch installed and working successfully with IMP-3.1? I would appreciate any ideas and suggestions regarding possible problems or solutions. Respectfully, Gary __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com From cw at nw-team.de Wed Jan 22 11:18:36 2003 From: cw at nw-team.de (Claus Windeler) Date: Wed Jan 22 02:31:57 2003 Subject: [horde] Problem with Horde groups and multiple calendars in Kronolith Message-ID: I have installed the the CVS version ( 21-1-2003 ) of Horde, Kronolith, Turba and IMP and I am using a MySQL database for authentication and storing of all the data. Test.php of Horde tells me that everything is OK and I created all the database tables using the available scripts. I have the following tables now: horde_users, horde_prefs, horde_categories, kronolith_events and kronolith_events_seq My problem is that I can't create any groups or mutiple calendars ... when I create a new group and try to add some users I am getting the follwing error: Fatal error: Call to undefined function: adduser() in /srv/www/htdocs/horde/admin/groups.php on line 115 When I don't try to add a user I am getting the following error Fatal error: Call to undefined function: getshortname() in /srv/www/htdocs/horde/admin/groups.php on line 128 And Horde is not saving the group. When I create a new calendar, Kronolith "forgets" it immediatly after creation ... the newly created calender dissapears Any ideas how to solve my problem ?? Bye Claus From s-beutel at gmx.de Wed Jan 22 11:55:47 2003 From: s-beutel at gmx.de (s-beutel@gmx.de) Date: Wed Jan 22 02:56:04 2003 Subject: [horde] Name of INBOX References: <003001c2c1fa$86d3fde0$19a8a8c0@jpmwin02> Message-ID: <31703.1043232947@www69.gmx.net> > OK, it works for the button but not for the > displayed folders. > Where can I look at the code to set translation > in the folder view? Well, this is the point Michael mentioned. Afaik horde/imp just displays the folders with their names as they are stored on the IMAP server - which is certainly the way to go. Furthermore, for these names are different from one installation to another, there is no practical way to translate them via gettext. You might try to work with your IMAP server: change the default inbox folder's name as far as this is possible, do the appropriate settings in your servers.php or whereever you have defined the connection data, and try again. But not every server allows changing that name (although e.g. cyrus uses INBOX. - trailing dot), and please know that this wouldn't be RFC-conform - your own risk. I do not know whether somebody has tried to have a hook or so just for setting another display name for INBOX inside horde; it should be possible, but requiring some coding... Best, Sebastian From jan at horde.org Wed Jan 22 12:02:42 2003 From: jan at horde.org (Jan Schneider) Date: Wed Jan 22 03:03:28 2003 Subject: [horde] enable UTF-8 then cause these problems In-Reply-To: <1043207738.cb7283089228b@webmail.thbuo.gov.tw> References: <1043024939.e2a67ff012de5@webmail.thbuo.gov.tw> <1043145977.2b4312c11eb40@jan.dip.ammma.net> <1043207738.cb7283089228b@webmail.thbuo.gov.tw> Message-ID: <1043233362.6fd721ce49e0e@217.88.140.187> Zitat von David Chang : > > > c. Chinese folders does not look correct after UTF-8 used.Can IMP > > > automaticly > > > handle folder name to transfer into UTF-8 ? Or user got manualy > rename > > > every > > > folder name one by one ? > > > > This should work automatically. I didn't have any problems creating > Chinese > > named folders here with IMP or with other MUAs and seeing them > correctly > > displayed in IMP. > > I use some new features of the mbstring extension to handle this, but > if it > > doesn't work (because your PHP is too old), it should fall back to the > old > > encoding method. > > > > That means if you used to be able to create Chinese folder names you > still > > should. If you never were but want to do so, you should upgrade your > PHP. > > > > Jan. > Hi Jan: > Folders that created (before UTF-8 enable) with Chinese format ,did not > display > in Chinese format since UTF-8 was enabled. How did you create the folders? With IMP? With another mail client. > I thnk my PHP should the new > enough > (PHP 4.3.0).So, what should i do ? Yes it is. Did you disable the mbstring settings in php.ini? These aren't necessary anymore if you enable utf support in Horde and I don't know if they perhaps interfere. Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From cw at nw-team.de Wed Jan 22 12:28:58 2003 From: cw at nw-team.de (Claus Windeler) Date: Wed Jan 22 03:32:04 2003 Subject: [horde] Re: Problem with Horde groups and multiple calendars in Kronolith References: Message-ID: Doh ... my fault ... Forgot to set $conf['category']['driver'] = 'sql'; From alaind-ml-horde at masurel.info Wed Jan 22 14:53:18 2003 From: alaind-ml-horde at masurel.info (alaind-ml-horde@masurel.info) Date: Wed Jan 22 05:53:26 2003 Subject: [horde] Horde on php 4.3.0 > fatal error In-Reply-To: <20030120233724.86352.qmail@web41509.mail.yahoo.com> References: <20030120233724.86352.qmail@web41509.mail.yahoo.com> Message-ID: <1043243598.3e2ea24e2c5c3@www.davreux.com> Hello, My horde install worked fust perfect during 4 monthes. 2 days ago, my host switched to php 4.3.0 (released 27th dec 02), and after the login page I get this : Fatal error: Call to undefined function: iswarning() in /home/yyy/www/horde/lib/Prefs/sql.php on line 101 when i search the file for iswarning I find this : /* Connect to the SQL server using the supplied parameters. */ include_once 'DB.php'; $this->db = &DB::connect($this->params, true); if (DB::isError($this->db) || DB::isWarning($this->db)) { Horde::fatal($this->db, __FILE__, __LINE__); } I don't understand much why the bug is SQL related ... I don't know what to do & what to look for. My host send a mail saying setlocale() function changed in php 4.3.0 (parameters do'nt come with " any more) but I can't use that for my problem ... I can access the db, I can access the email accounts from a copy of the webmail located on an other server (who did not switched to 4.3.0), therefore it is horde I have to work on. Can anyone give me a hand ? I searched the mailing list for 4.3.0 but did not found out ... Alan. From chuck at horde.org Wed Jan 22 09:56:14 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Wed Jan 22 06:58:42 2003 Subject: [horde] Open IMP composer from aother application In-Reply-To: <3E2E53FC.8050101@musik.auc.dk> References: <3E2D55C2.6030003@musik.auc.dk> <3E2E53FC.8050101@musik.auc.dk> Message-ID: <1043247374.897e97cd6d4c0@marina.horde.org> Quoting S?ren Schimkat : > Whups... my mistake. You're using Whups? That requires Horde HEAD. ;) > I'm using Horde V2.0 and Imp V3.0 link('mail/compose', array('to' => $address, 'label' => $address)); -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From heikki.y at empiria.org Wed Jan 22 17:15:06 2003 From: heikki.y at empiria.org (Heikki Ylipaavalniemi) Date: Wed Jan 22 07:14:09 2003 Subject: [horde] upgrading In-Reply-To: <1042949060.4b55af2cad6f9@mail.ph.utexas.edu> References: <8952972187.20030119020401@empiria.org> <1042949060.4b55af2cad6f9@mail.ph.utexas.edu> Message-ID: <13126415703.20030122171506@empiria.org> Hello Eric, I just ran the make install command again and it succesfully updated the translation files. Now the weird thing is that when I login into Horde the language is Finnish but after clicking around it turns back to English. Probably a cache error? But how can I fix it when I have tried refreshing etc. And when I refresh several times it jumps from Finnish to English without any rule. Does the server need to be rebooted or what could help? 19. tammikuuta 2003, 6:04, you wrote: ER> Quoting Heikki Ylipaavalniemi : >> I just updated mnemo manually and it seems to work fine except for the thing >> that some of the text >> which should be in Finnish are in English. What could be causing this? ER> 1) You didn't update the translations properly (may have to run "make" or ER> something). ER> 2) The Finnish translation is not complete. ER> 3) There is a bug or problem somewhere. ER> First I would go to the horde/po/README file and read it. Maybe you will ER> find the info you need there. If not, then I would go to the mnemo/po/ ER> folder, and run the make. If that doesn't work, I'd assume the translation ER> is out of date. But others may find another reason/answer for you. ER> -- ER> Eric Rostetter ER> The Department of Physics ER> The University of Texas at Austin ER> Why get even? Get odd! -- Best regards, Heikki mailto:heikki.y@empiria.org From alaind-ml-horde at masurel.info Wed Jan 22 16:22:46 2003 From: alaind-ml-horde at masurel.info (alaind-ml-horde@masurel.info) Date: Wed Jan 22 07:22:54 2003 Subject: [horde] Re: Horde on php 4.3.0 > fatal error In-Reply-To: <000f01c2c229$8da82590$0600a8c0@dejour> References: <20030120233724.86352.qmail@web41509.mail.yahoo.com> <1043243598.3e2ea24e2c5c3@www.davreux.com> <000f01c2c229$8da82590$0600a8c0@dejour> Message-ID: <1043248966.3e2eb746361f3@www.davreux.com> Thanks for your answer. I'm going to install horde latest 2.2 and hope it will solve it, if not I fear I'll have to use CVS (hope it si quite stable :D). Selon William Curley : > This is a problem with the newer PEAR db library I believe. Either you can > comment out that section or upgrade to horde CVS. > > ----- Original Message ----- > From: > Newsgroups: gmane.comp.horde.user > Sent: Wednesday, January 22, 2003 5:53 AM > Subject: Horde on php 4.3.0 > fatal error > > > > Hello, > > My horde install worked fust perfect during 4 monthes. 2 days ago, my host > switched to php 4.3.0 (released 27th dec 02), and after the login page I > get > this : > > Fatal error: Call to undefined function: iswarning() > in /home/yyy/www/horde/lib/Prefs/sql.php on line 101 > > when i search the file for iswarning I find this : > > /* Connect to the SQL server using the supplied parameters. */ > include_once 'DB.php'; > $this->db = &DB::connect($this->params, true); > if (DB::isError($this->db) || DB::isWarning($this->db)) { > Horde::fatal($this->db, __FILE__, __LINE__); > } > > I don't understand much why the bug is SQL related ... I don't know what to > do > & what to look for. My host send a mail saying setlocale() function changed > in > php 4.3.0 (parameters do'nt come with " any more) but I can't use that for > my > problem ... > > I can access the db, I can access the email accounts from a copy of the > webmail > located on an other server (who did not switched to 4.3.0), therefore it is > horde I have to work on. Can anyone give me a hand ? I searched the mailing > list for 4.3.0 but did not found out ... > > Alan. > > > > -- > Horde mailing list > Frequently Asked Questions: http://horde.org/faq/ > To unsubscribe, mail: horde-unsubscribe@lists.horde.org > > From francois.helly at wanadoo.fr Wed Jan 22 18:53:19 2003 From: francois.helly at wanadoo.fr (=?iso-8859-1?Q?Fran=E7ois?= Helly) Date: Wed Jan 22 09:55:21 2003 Subject: [horde] sybase sql script In-Reply-To: <1042049793.3e1c6b01e9c67@marina.horde.org> References: <200301081053410180.0D5ADDFF@relais.videotron.ca> <1042049793.3e1c6b01e9c67@marina.horde.org> Message-ID: An horde sql script for sybase (ASE) It works fine on a solaris server (5.8) regards -------------- next part -------------- A non-text attachment was scrubbed... Name: horde_sybase.sql Type: application/mac-binhex40 Size: 5488 bytes Desc: not available Url : http://lists.horde.org/archives/horde/attachments/20030122/1267e3c0/horde_sybase.bin -------------- next part -------------- -- ------------------------ fran?ois helly designer 17, rue de Nuits 69004 LYON - France t?l./fax 33 [0]4 78 28 73 30 portable 06 16 17 78 84 e-mail: francois.helly@wanadoo.fr ------------------------ From lists at stinkfoot.org Wed Jan 22 13:52:56 2003 From: lists at stinkfoot.org (Ethan Weinstein) Date: Wed Jan 22 10:50:43 2003 Subject: [horde] MySQL session handler problems with Horde 2.2 Message-ID: <3E2EE888.1040002@stinkfoot.org> I installed horde 2.2, and am attempting to use the mysql session handler. I'm getting these errors while trying to login: Jan 22 11:55:42 spicymeatball HORDE[1966]: [horde] SQL Query by SessionHandler_mysql::read(): query = "SELECT session_data FROM mysql_sessionhandler WHERE session_id = f36fabe85b2e0c576b6b6943fcc06276" [on line 96 of "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] Jan 22 11:55:42 spicymeatball HORDE[1966]: [horde] Error retrieving session data (id = f36fabe85b2e0c576b6b6943fcc06276) [on line 104 of "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] Jan 22 11:55:42 spicymeatball \177??x\177??|[1966]: [horde] SQL Query by SessionHandler_mysql::write(): query = "REPLACE INTO mysql_sessionhandler (session_id, session_data, session_lastmodified) VALUES (f36fabe85b2e0c576b6b6943fcc06276, prefs_cache|a:1:{s:7:\"_filled\";a:0:{}}hordeMessageStacks|a:1:{s:6:\"status\";a:0:{}}, 1043254542)" [on line 124 of "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] Jan 22 11:55:42 spicymeatball \177??x\177??|[1966]: [horde] Error writing session data [on line 128 of "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] The mysql_sessionhandler table does exist within the horde db, the permissions and username+password are definately correct.. Here's what I have in horde.php: $conf['sessionhandler']['type'] = 'mysql'; // Database or other drivers might require configuration parameters // here. $conf['sessionhandler']['params'] = array(); $conf['sessionhandler']['params']['phptype'] = 'mysql'; $conf['sessionhandler']['params']['hostspec'] = 'localhost'; $conf['sessionhandler']['params']['username'] = 'horde'; $conf['sessionhandler']['params']['password'] = 'password_deleted'; $conf['sessionhandler']['params']['database'] = 'horde2'; $conf['sessionhandler']['params']['table'] = 'mysql_sessionhandler'; What gives? and what's with the bizarre syslog messages "\177??x\177??|[1966]:" ?? Did I forget a param? I was using a custom mysql sessionhandler with horde 2.1 and it worked quite well. thanks, Ethan Weinstein From me at danielreich.com Tue Jan 21 15:59:44 2003 From: me at danielreich.com (Daniel Reich) Date: Wed Jan 22 12:30:11 2003 Subject: [horde] Using curl wrappers instead of fopen In-Reply-To: <20030121200010.B7EFA37@vlad.horde.org> References: <20030121200010.B7EFA37@vlad.horde.org> Message-ID: <1043182783.2335.237.camel@localhost> I guess what I'm looking to do here is standardize the way URLs are fetched within the Horde framework. I did look at Snoopy btw but I looked at the library included with Klutz. It does have some interesting things. My thought is that it would be nice if I could set the proxy (or other pertinent connection information) in one place and then have all the modules take advantage of it. It wouldn't be very difficult to write and I'd be happy to do so if there is consensus on going down that path. I could either modify Snoopy or write a new class from scratch. I do think modifying snoopy is probably a better path. Once that's in place I could go around to the various modules and modify them to use this new method. Right now I have to go and modify each module to utilize the proxy which i'd like to get away from. The only scary part about snoopy is that it utilizes the command line curl instead of the PHP extension (from what I gather curl extension isn't stable on all builds). But I don't see any attempts to escape characters in the actual exec call. From the looks of it, this is only a concern for doing https calls. HTTP requests don't make use of curl. (at least in v1.0, Horde includes v0.94). I'm gonna see if I can get clarification on this from the developers of Snoopy. Cheers -dr > From: Jan Schneider > To: horde@lists.horde.org > Subject: Re: [horde] Using curl wrappers instead of fopen > Date: 21 Jan 2003 17:50:42 +0100 > > Zitat von Daniel Reich : > > > I'd like to offer up an alternative to using fopen. Granted curl is yet > > another module to install, but I think it'd be useful. I wrote a quick > > function that uses curl to grab a URL via proxy (authenticated too). > > > > I thought this could go into the Horde library. And if this is ok, I'd > > like to write another function which will act as a wrapper so that if > > you have curl extensions installed it will use curl, otherwise it will > > use fopen. Other horde modules could utilize this to pull down lots of > > URLs (ie Jonah). I should probably extend this to handle cookies in > > some fashion too now that I'm looking back... > > You should take a look at Snoopy.php in horde/lib. IIRC it currently uses > the curl command line interface but it probably can be extended to use the > extension if available. > > Jan. > > -- > http://www.horde.org - The Horde Project > http://www.ammma.de - discover your knowledge > http://www.tip4all.de - Deine private Tippgemeinschaft From jrkuipers at lauwerscollege.nl Wed Jan 22 22:31:44 2003 From: jrkuipers at lauwerscollege.nl (Jan Kuipers) Date: Wed Jan 22 13:31:53 2003 Subject: [horde] Strange problem with Horde (HEAD) and Mozilla In-Reply-To: <1043150511.dd0278ef93ee6@jan.dip.ammma.net> References: <1043095912.65495c2c7e1f3@horde.lauwerscollege.nl> <1043137281.f0db3dddc73ff@horde.lauwerscollege.nl> <1043142181.3fc78679eb563@jan.dip.ammma.net> <1043143763.fa77587ca120c@horde.lauwerscollege.nl> <1043150511.dd0278ef93ee6@jan.dip.ammma.net> Message-ID: <1043271104.7257b8630134f@horde.lauwerscollege.nl> Citeren Jan Schneider : > Renders fine here (< 1 sec.) with the new menu on Mozilla 1.2.1, all apps > installed with a Pentium IIIm 1 GHz. I solved this one by setting output_buffering to off in php.ini (default 4096 in php-4.3.0, default Off in CVS). When I use zlib.output_compression = Off and output_buffering = 4096 and $conf['compress_pages'] = true; I keep getting "output handler 'ob_gzhandler' cannot be used twice in..." errors. Setting output_buffering = Off silences these too. -- Jan Kuipers Systeembeheer Lauwers College From lists at stinkfoot.org Wed Jan 22 17:36:59 2003 From: lists at stinkfoot.org (Ethan Weinstein) Date: Wed Jan 22 14:35:02 2003 Subject: [horde] MySQL session handler problems with Horde 2.2 In-Reply-To: <3E2EE888.1040002@stinkfoot.org> References: <3E2EE888.1040002@stinkfoot.org> Message-ID: <3E2F1D0B.4020704@stinkfoot.org> Ok, I fixed that one.. It was a merely a typo in config/horde.php. I apologize =) But, I have found another problem in upgrading from Horde 2.1 to 2.2: Redirection to SSL-only ($conf['use_ssl'] = 1;) is no longer working. Using Horde 2.1, https uri's are always generated. After upgrading, The browser gives an error if one goes to http://horde/url Apache logs this: [Wed Jan 22 17:02:25 2003] [error] [client 1.2.3.4] Invalid method in request ?L [Wed Jan 22 17:02:28 2003] [error] [client 1.2.3.4] Invalid method in request ?L [Wed Jan 22 17:10:26 2003] [error] [client 1.2.3.4] Invalid method in request ?C [Wed Jan 22 17:10:32 2003] [error] [client 1.2.3.4] Invalid method in request ?C Which looks to me like https spoken on http only port. Is there perhaps a problem in the redirection or rewriting code ? https://horde/url works fine, which leads me to this conclusion. Horde 2.1 did not need the https, it rewrote to it automatically. -Ethan Weinstein Ethan Weinstein wrote: > I installed horde 2.2, and am attempting to use the mysql session > handler. I'm getting these errors while trying to login: > > Jan 22 11:55:42 spicymeatball HORDE[1966]: [horde] SQL Query by > SessionHandler_mysql::read(): query = "SELECT session_data FROM > mysql_sessionhandler WHERE session_id = > f36fabe85b2e0c576b6b6943fcc06276" [on line 96 of > "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] > Jan 22 11:55:42 spicymeatball HORDE[1966]: [horde] Error retrieving > session data (id = f36fabe85b2e0c576b6b6943fcc06276) [on line 104 of > "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] > Jan 22 11:55:42 spicymeatball \177??x\177??|[1966]: [horde] SQL Query by > SessionHandler_mysql::write(): query = "REPLACE INTO > mysql_sessionhandler (session_id, session_data, session_lastmodified) > VALUES (f36fabe85b2e0c576b6b6943fcc06276, > prefs_cache|a:1:{s:7:\"_filled\";a:0:{}}hordeMessageStacks|a:1:{s:6:\"status\";a:0:{}}, > > 1043254542)" [on line 124 of > "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] > Jan 22 11:55:42 spicymeatball \177??x\177??|[1966]: [horde] Error > writing session data [on line 128 of > "/usr/local/apache2/htdocs/horde2/lib/SessionHandler/mysql.php"] > > The mysql_sessionhandler table does exist within the horde db, the > permissions and username+password are definately correct.. Here's what > I have in horde.php: > > $conf['sessionhandler']['type'] = 'mysql'; > > // Database or other drivers might require configuration parameters > // here. > $conf['sessionhandler']['params'] = array(); > $conf['sessionhandler']['params']['phptype'] = 'mysql'; > $conf['sessionhandler']['params']['hostspec'] = 'localhost'; > $conf['sessionhandler']['params']['username'] = 'horde'; > $conf['sessionhandler']['params']['password'] = 'password_deleted'; > $conf['sessionhandler']['params']['database'] = 'horde2'; > $conf['sessionhandler']['params']['table'] = 'mysql_sessionhandler'; > > What gives? and what's with the bizarre syslog messages > "\177??x\177??|[1966]:" ?? Did I forget a param? > > I was using a custom mysql sessionhandler with horde 2.1 and it worked > quite well. > > thanks, > > > Ethan Weinstein > > > From derek at younet.okstate.edu Wed Jan 22 17:31:30 2003 From: derek at younet.okstate.edu (Derek Martin) Date: Wed Jan 22 15:31:52 2003 Subject: [horde] Login Check In-Reply-To: <1043213592.be5fcc065ec61@mail.ph.utexas.edu> Message-ID: <006a01c2c26e$6521cbe0$9bf20c44@DerekMartin> Does Horde::getAuth() return a 1 for logged in and 0 for not logged in??? Derek -----Original Message----- From: horde-bounces@lists.horde.org [mailto:horde-bounces@lists.horde.org] On Behalf Of Eric Rostetter Sent: Tuesday, January 21, 2003 11:33 PM To: horde@lists.horde.org Subject: Re: [horde] Login Check *This message was transferred with a trial version of CommuniGate(tm) Pro* Quoting Derek Martin : > My question is that is there a way to confirm by some method in HORDE > to verify that the login was successful - in my other systems I can > call a method isUserLoggedIn() and that works great but as yet, > haven't isolated one from HORDE...anyone have any thoughts? Horde::getAuth() -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! -- Horde mailing list Frequently Asked Questions: http://horde.org/faq/ To unsubscribe, mail: horde-unsubscribe@lists.horde.org -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3234 bytes Desc: not available Url : http://lists.horde.org/archives/horde/attachments/20030122/0c5030cf/smime.bin From mike at graftonhall.co.nz Thu Jan 23 12:49:29 2003 From: mike at graftonhall.co.nz (Mike Cochrane) Date: Wed Jan 22 15:47:12 2003 Subject: [horde] Login Check In-Reply-To: <006a01c2c26e$6521cbe0$9bf20c44@DerekMartin> References: <006a01c2c26e$6521cbe0$9bf20c44@DerekMartin> Message-ID: <1043279369.4ffc19c795fe1@clean.graftonhall.co.nz> > ----- Message from derek@younet.okstate.edu --------- > > Does Horde::getAuth() return a 1 for logged in and 0 for not logged > in??? > Returns false or the username of the logged in user. - Mike :-) From chuck at horde.org Wed Jan 22 19:39:31 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Wed Jan 22 16:42:01 2003 Subject: [horde] Login Check In-Reply-To: <006a01c2c26e$6521cbe0$9bf20c44@DerekMartin> References: <006a01c2c26e$6521cbe0$9bf20c44@DerekMartin> Message-ID: <1043282371.4e4deb10279a2@marina.horde.org> Quoting Derek Martin : > Does Horde::getAuth() return a 1 for logged in and 0 for not logged > in??? Save some question marks for the rest of us. There is no Horde::getAuth() function. -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From derek at younet.okstate.edu Wed Jan 22 18:45:56 2003 From: derek at younet.okstate.edu (Derek Martin) Date: Wed Jan 22 16:46:19 2003 Subject: [horde] Login Check In-Reply-To: <1043282371.4e4deb10279a2@marina.horde.org> Message-ID: <007e01c2c278$ca655da0$9bf20c44@DerekMartin> Sorry Chuck, please explain...are you saying that Eric and Mike are incorrect in that Horde::getAuth() would not work? I think I follow you in that I cannot just say Horde::getAuth() and expect something to return that I could print to the screen, but then again, what would work? Derek -----Original Message----- From: horde-bounces@lists.horde.org [mailto:horde-bounces@lists.horde.org] On Behalf Of Chuck Hagenbuch Sent: Wednesday, January 22, 2003 6:40 PM To: horde@lists.horde.org Subject: RE: [horde] Login Check *This message was transferred with a trial version of CommuniGate(tm) Pro* Quoting Derek Martin : > Does Horde::getAuth() return a 1 for logged in and 0 for not logged > in??? Save some question marks for the rest of us. There is no Horde::getAuth() function. -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* -- Horde mailing list Frequently Asked Questions: http://horde.org/faq/ To unsubscribe, mail: horde-unsubscribe@lists.horde.org -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 3234 bytes Desc: not available Url : http://lists.horde.org/archives/horde/attachments/20030122/1090c3c0/smime.bin From chuck at horde.org Wed Jan 22 19:46:11 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Wed Jan 22 16:48:40 2003 Subject: [horde] Login Check In-Reply-To: <007e01c2c278$ca655da0$9bf20c44@DerekMartin> References: <007e01c2c278$ca655da0$9bf20c44@DerekMartin> Message-ID: <1043282771.88c829c2c6abd@marina.horde.org> Quoting Derek Martin : > Sorry Chuck, please explain...are you saying that Eric and Mike are > incorrect in that Horde::getAuth() would not work? I think I follow you > in that I cannot just say Horde::getAuth() and expect something to > return that I could print to the screen, but then again, what would > work? This should be what you want: http://dev.horde.org/api/horde/dev-doxygen/html/classAuth.html#a9 -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From eric.rostetter at physics.utexas.edu Wed Jan 22 21:11:33 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Wed Jan 22 19:11:37 2003 Subject: [horde] upgrading In-Reply-To: <13126415703.20030122171506@empiria.org> References: <8952972187.20030119020401@empiria.org> <1042949060.4b55af2cad6f9@mail.ph.utexas.edu> <13126415703.20030122171506@empiria.org> Message-ID: <1043291493.f52299455d033@mail.ph.utexas.edu> Quoting Heikki Ylipaavalniemi : > Hello Eric, > > I just ran the make install command again and it succesfully updated the > translation files. It may help after that to restart your web server, and restart your browser. If you run a php accelerator, restarting that may help. > Now the > weird thing is that when I login into Horde the language is Finnish but after > clicking around it > turns back to English. I've heard of that when things are restarted as noted above, and also from a few rare souls who have this problem with incomplete translations. > Probably a cache error? But how can I fix it when I > have tried refreshing > etc. And when I refresh several times it jumps from Finnish to English > without any rule. Other than the above hints, I have no clue. > Does the server need to be rebooted or what could help? Well, couldn't hurt, but usually not required. > 19. tammikuuta 2003, 6:04, you wrote: > > ER> Quoting Heikki Ylipaavalniemi : > > >> I just updated mnemo manually and it seems to work fine except for the > thing > >> that some of the text > >> which should be in Finnish are in English. What could be causing this? > > ER> 1) You didn't update the translations properly (may have to run "make" or > ER> something). > ER> 2) The Finnish translation is not complete. > ER> 3) There is a bug or problem somewhere. > > ER> First I would go to the horde/po/README file and read it. Maybe you will > ER> find the info you need there. If not, then I would go to the mnemo/po/ > ER> folder, and run the make. If that doesn't work, I'd assume the > translation > ER> is out of date. But others may find another reason/answer for you. > > ER> -- > ER> Eric Rostetter > ER> The Department of Physics > ER> The University of Texas at Austin > > ER> Why get even? Get odd! > > > > -- > Best regards, > Heikki mailto:heikki.y@empiria.org > > > -- > Horde mailing list > Frequently Asked Questions: http://horde.org/faq/ > To unsubscribe, mail: horde-unsubscribe@lists.horde.org > -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From chuck at horde.org Wed Jan 22 22:32:27 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Wed Jan 22 19:34:56 2003 Subject: [horde] Using curl wrappers instead of fopen In-Reply-To: <1043182783.2335.237.camel@localhost> References: <20030121200010.B7EFA37@vlad.horde.org> <1043182783.2335.237.camel@localhost> Message-ID: <1043292747.9039348212582@marina.horde.org> Quoting Daniel Reich : > I guess what I'm looking to do here is standardize the way URLs are > fetched within the Horde framework. Something like this - something lightweight - would be great. It'd be nice to have a lighter-weight, cleaner version of snoopy available for all of Horde to use. Some things we don't need curl for - since php 4.3 if you compile --with-openssl fopen() supports https. But things like POSTs, cookies, and proxies are worth getting under one roof. If you're willing to clean up Snoopy to match our coding standards/conventions/etc. that'd be great, but otherwise I'd rather have a new class. -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From chuck at horde.org Wed Jan 22 22:43:22 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Wed Jan 22 19:46:03 2003 Subject: [horde] sybase sql script In-Reply-To: References: <200301081053410180.0D5ADDFF@relais.videotron.ca> <1042049793.3e1c6b01e9c67@marina.horde.org> Message-ID: <1043293402.9cf35331df8c7@marina.horde.org> Quoting Fran?ois Helly : > An horde sql script for sybase (ASE) > > It works fine on a solaris server (5.8) Committed, thanks! -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From schimkat at musik.auc.dk Thu Jan 23 09:43:04 2003 From: schimkat at musik.auc.dk (=?UTF-8?B?U8O4cmVuIFNjaGlta2F0?=) Date: Thu Jan 23 00:41:16 2003 Subject: [horde] Open IMP composer from aother application References: <3E2D55C2.6030003@musik.auc.dk> <3E2E53FC.8050101@musik.auc.dk> <1043247374.897e97cd6d4c0@marina.horde.org> Message-ID: <3E2FAB18.8080900@musik.auc.dk> Hi Chuck Now I just need to include the code that actually open the compose window. I've found it in this file: imp/templates/javascript/open_compose_win.js What would be the correct way to include this code? Regards S?ren Chuck Hagenbuch wrote: > Quoting S?ren Schimkat : > > >>Whups... my mistake. > > > You're using Whups? That requires Horde HEAD. ;) > > >>I'm using Horde V2.0 and Imp V3.0 > > > > define('HORDE_BASE', '/path/to/horde'); > require_once HORDE_BASE . '/lib/Registry.php'; > > $registry = &Registry::singleton(); > > echo $registry->link('mail/compose', array('to' => $address, > 'label' => $address)); > > -chuck > > -- > Charles Hagenbuch, > must ... find ... acorns ... *thud* > From slusarz at bigworm.colorado.edu Thu Jan 23 01:49:34 2003 From: slusarz at bigworm.colorado.edu (Michael M Slusarz) Date: Thu Jan 23 00:49:57 2003 Subject: [horde] Fwd: [cvs] commit: horde/config horde.php.dist Message-ID: <1043311774.d541cfd53ee4a@bigworm.colorado.edu> Jon, This, essentially, is the warning that never got placed into Horde 2.2 before it was released. Don't know if it is worthwhile to release as 2.2.1 or not (especially in light of the fact that IMP 3.2 doesn't exist yet). michael ----- Forwarded message from slusarz@bigworm.colorado.edu ----- Date: Thu, 23 Jan 2003 00:46:49 -0800 (PST) From: Michael M Slusarz Reply-To: dev@lists.horde.org Subject: [cvs] commit: horde/config horde.php.dist To: cvs@lists.horde.org slusarz 2003/01/23 00:46:49 PST Modified files: (Branch: RELENG_2) config horde.php.dist Log: This was the warning that never made it into Horde 2.2. Revision Changes Path 1.47.2.29 +5 -1 horde/config/Attic/horde.php.dist Chora Links: http://cvs.horde.org/diff.php/horde/config/Attic/horde.php.dist? r1=1.47.2.28&r2=1.47.2.29&ty=u -- To unsubscribe, mail: cvs-unsubscribe@lists.horde.org ----- End forwarded message ----- ______________________________________________ Michael Slusarz [slusarz@bigworm.colorado.edu] The University of Colorado at Boulder From heikki.y at empiria.org Thu Jan 23 11:18:37 2003 From: heikki.y at empiria.org (Heikki Ylipaavalniemi) Date: Thu Jan 23 01:17:37 2003 Subject: [horde] upgrading In-Reply-To: <1043291493.f52299455d033@mail.ph.utexas.edu> References: <8952972187.20030119020401@empiria.org> <1042949060.4b55af2cad6f9@mail.ph.utexas.edu> <13126415703.20030122171506@empiria.org> <1043291493.f52299455d033@mail.ph.utexas.edu> Message-ID: <160397343.20030123111837@empiria.org> Hello Eric, Thanks for the tip. Oh yesh, I forgot to mention in the mail yesterday. The Makefile in Mnemo seems to be broken. When I used it it gave me this error: /bin/sh: line 1: test: =: unary operator expected Compiling locale cs_CZ: with every language. I edited the Makefile from IMP to match the Mnemo parts and tried again and now the make install ran without errors. 23. tammikuuta 2003, 5:11, you wrote: ER> Quoting Heikki Ylipaavalniemi : >> Hello Eric, >> >> I just ran the make install command again and it succesfully updated the >> translation files. ER> It may help after that to restart your web server, and restart your browser. ER> If you run a php accelerator, restarting that may help. >> Now the >> weird thing is that when I login into Horde the language is Finnish but after >> clicking around it >> turns back to English. ER> I've heard of that when things are restarted as noted above, and also from ER> a few rare souls who have this problem with incomplete translations. >> Probably a cache error? But how can I fix it when I >> have tried refreshing >> etc. And when I refresh several times it jumps from Finnish to English >> without any rule. ER> Other than the above hints, I have no clue. >> Does the server need to be rebooted or what could help? ER> Well, couldn't hurt, but usually not required. >> 19. tammikuuta 2003, 6:04, you wrote: >> >> ER> Quoting Heikki Ylipaavalniemi : >> >> >> I just updated mnemo manually and it seems to work fine except for the >> thing >> >> that some of the text >> >> which should be in Finnish are in English. What could be causing this? >> >> ER> 1) You didn't update the translations properly (may have to run "make" or >> ER> something). >> ER> 2) The Finnish translation is not complete. >> ER> 3) There is a bug or problem somewhere. >> >> ER> First I would go to the horde/po/README file and read it. Maybe you will >> ER> find the info you need there. If not, then I would go to the mnemo/po/ >> ER> folder, and run the make. If that doesn't work, I'd assume the >> translation >> ER> is out of date. But others may find another reason/answer for you. >> >> ER> -- >> ER> Eric Rostetter >> ER> The Department of Physics >> ER> The University of Texas at Austin >> >> ER> Why get even? Get odd! >> >> >> >> -- >> Best regards, >> Heikki mailto:heikki.y@empiria.org >> >> >> -- >> Horde mailing list >> Frequently Asked Questions: http://horde.org/faq/ >> To unsubscribe, mail: horde-unsubscribe@lists.horde.org >> ER> -- ER> Eric Rostetter ER> The Department of Physics ER> The University of Texas at Austin ER> Why get even? Get odd! -- Best regards, Heikki mailto:heikki.y@empiria.org From brett at nerdsonsite.co.za Thu Jan 23 13:40:39 2003 From: brett at nerdsonsite.co.za (Brett) Date: Thu Jan 23 03:40:55 2003 Subject: [horde] Problem authenticating Message-ID: <000001c2c2d4$415d3d00$8401a8c0@SAURON> Hi all, I have installed the horde framework and kronolith (on rh7.3). I am not sure how to add a user - I am using the system for the calendar only. My horde/config/horde.php is configured as follows: $conf['auth']['params'] = array(); $conf['auth']['params']['phptype'] = 'mysql'; $conf['auth']['params']['hostspec'] = 'localhost'; $conf['auth']['params']['username'] = 'horde'; $conf['auth']['params']['password'] = '****'; //a valid password is here $conf['auth']['params']['database'] = 'horde'; $conf['auth']['params']['table'] = 'horde_users'; //I have tried setting this to horde_prefs as well $conf['prefs']['params']['phptype'] = 'mysql'; $conf['prefs']['params']['hostspec'] = 'localhost'; $conf['prefs']['params']['username'] = 'horde'; $conf['prefs']['params']['password'] = '*****'; //valid password here $conf['prefs']['params']['database'] = 'horde'; $conf['prefs']['params']['table'] = 'horde_prefs'; I have manually added a user into the horde_users table (insert into horde_users values ("user",password("pass")) - have tried this with password and plain text ), but have not added anything into the horde_prefs table. When I try log in, the login screen is reloaded. What is the correct procedure for adding users? I know im probably doing something wrong that's obvious, but can see it. Thanks in advance brett From jan at horde.org Thu Jan 23 12:46:47 2003 From: jan at horde.org (Jan Schneider) Date: Thu Jan 23 03:47:06 2003 Subject: [horde] Problem authenticating In-Reply-To: <000001c2c2d4$415d3d00$8401a8c0@SAURON> References: <000001c2c2d4$415d3d00$8401a8c0@SAURON> Message-ID: <1043322407.7585489c5e4eb@jan.dip.ammma.net> Zitat von Brett : > I am not sure how to add a user - I am using the system for the calendar > only. > I have manually added a user into the horde_users table (insert into > horde_users values ("user",password("pass")) - have tried this with > password and plain text ), but have not added anything into the > horde_prefs table. insert into horde_users values ("user", md5("pass")) Jan. -- http://www.horde.org - The Horde Project http://www.ammma.de - discover your knowledge http://www.tip4all.de - Deine private Tippgemeinschaft From s-beutel at gmx.de Thu Jan 23 14:28:36 2003 From: s-beutel at gmx.de (s-beutel@gmx.de) Date: Thu Jan 23 05:28:51 2003 Subject: [horde] IMP Login Problem : Couldn't open stream References: <057701c2c236$0ad8d440$0a01a8c0@SERVER> Message-ID: <7141.1043328516@www55.gmx.net> Jordi, first, please stick to the list for the archives. I guess you have a TLS problem or so. Know that the IMP test doesn't support all security layers - it just tries via plain IMAP. I'd suggest as follows: - check all available logs; even your IMAP server should give you some information if the request reached him but was invalid - try a cross-check: (1) with your IMP, try to connect to another IMAP server if available (internet connection, account) (2) with another IMP installation (horde's demo site; you might find some other installations in the web when googling a bit), try to connect to your IMAP server In both cases, check the net connection (firewall, proxy?). Furthermore, you might want to forget about the imp test and go on straight forward to configuring your IMP. In the conf.php, section mail server settings, set server_list to 'none' and all following option to true. Now, at login, you are prompted to select server address, port, protocol etc. Play a bit 'round; this way you will find the settings you'll need. Kind regards, Sebastian > Hello, First of all, I would like to thank you for your attention > > I attach you a e-mail with the server description > I attach other messages with other information with other list people > and more information about the problem. > The first attach message have the server information > > > The horde/test.php works fine and there is not errors. > I paste the test.php result: > > Horde Versions > a.. Horde: 2.1 > b.. IMP: 3.1 (run IMP tests) > c.. Turba: 1.1 > PHP Version > a.. View phpinfo() screen > b.. PHP Version: 4.2.3 > c.. PHP Major Version: 4.2 > d.. PHP Minor Version: 3 > e.. PHP Version Classification: release > f.. You are running a supported version of PHP. > PHP Module Capabilities > a.. FTP Support: Yes > b.. Gettext Support: Yes > c.. IMAP Support: Yes > d.. LDAP Support: No > e.. MCAL Support: No > f.. Mcrypt Support: No > g.. MySQL Support: Yes > h.. PostgreSQL Support: No > i.. XML Support: Yes > Miscellaneous PHP Settings > a.. short_open_tag enabled: Yes > b.. magic_quotes_runtime set to Off: Yes > c.. file_uploads enabled: Yes > PHP Sessions > a.. Session counter: 1 > b.. To unregister the session: click here > PEAR > a.. PEAR - Yes > b.. Recent PEAR - Yes > c.. Mail::RFC822 - Yes > d.. Log - Yes > e.. DB - Yes > > > Thanks in adavanced, Jordi. > PS: I need solve it and I can not understand why it dosen't work fine > !!! > > ----- Original Message ----- > From: > To: "EFETEPE MANAGER" > Cc: ; > Sent: Wednesday, January 22, 2003 12:03 AM > Subject: Re: [horde] IMP Login Problem : Couldn't open stream > > > > Hi again, > > > > I have a problem with IMP Login, When I try login the following error > > occur: > > > > server="localhost" user="the_user_name" > mailbox="{localhost:143}INBOX" > > Warning: Couldn't open stream {localhost:143}INBOX in > > /wwwroot/horde/imp/test.php on line 166 > > Warning: imap_mailboxmsginfo(): supplied argument is not a valid > imap > > resource in /wwwroot/horde/imp/test.php on line 169 > > INBOX has messages ( new recent) > > Warning: imap_close(): supplied argument is not a valid imap > resource > > in > > /wwwroot/horde/imp/test.php on line 171 > > Any errors at the /horde/test.php? Esp. PEAR errors? > Which IMAP server are you running? > > Sebastian > > > From eric.rostetter at physics.utexas.edu Thu Jan 23 08:15:24 2003 From: eric.rostetter at physics.utexas.edu (Eric Rostetter) Date: Thu Jan 23 06:15:29 2003 Subject: [horde] Login Check In-Reply-To: <1043282371.4e4deb10279a2@marina.horde.org> References: <006a01c2c26e$6521cbe0$9bf20c44@DerekMartin> <1043282371.4e4deb10279a2@marina.horde.org> Message-ID: <1043331324.12f85a4b3bf1c@mail.ph.utexas.edu> Quoting Chuck Hagenbuch : > Quoting Derek Martin : > > > Does Horde::getAuth() return a 1 for logged in and 0 for not logged > > in??? > > Save some question marks for the rest of us. There is no Horde::getAuth() > function. > > -chuck That may have been my mistake. If so, the actual routine is Auth::getAuth() and I think returns true for logged in and false for not logged in. -- Eric Rostetter The Department of Physics The University of Texas at Austin Why get even? Get odd! From chuck at horde.org Thu Jan 23 09:56:03 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Thu Jan 23 06:58:36 2003 Subject: [horde] Open IMP composer from aother application In-Reply-To: <3E2FAB18.8080900@musik.auc.dk> References: <3E2D55C2.6030003@musik.auc.dk> <3E2E53FC.8050101@musik.auc.dk> <3E2FAB18.8080900@musik.auc.dk> Message-ID: <1043333763.ed653412f5535@marina.horde.org> Quoting S?ren Schimkat : > Now I just need to include the code that actually open the compose > window. I've found it in this file: > > imp/templates/javascript/open_compose_win.js > > What would be the correct way to include this code? In your version, calling $registry->shutdown() after the mail/compose call should do it. -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From mikejp at videotron.ca Thu Jan 23 10:31:08 2003 From: mikejp at videotron.ca (Michael J. Pawlowsky) Date: Thu Jan 23 07:30:18 2003 Subject: [horde] Menus Message-ID: <200301231031080133.02F30ABF@relais.videotron.ca> I did some CVS updates and now the menus do not collapse for me any more. Anyone else experiencing this? I noticed 2 things that could be causing problems but havent tried them yet to see if this will fix my problem. 1) Someone moved the JavaScript back into the head. 2) The Transitional DocType was put back in. Before I play around with these just wanted to know if anyone else had any ideas. I get the menu_dhtml.php page. Everything on it is expanded like if it does not uderstand DHTML hidden. Both in Netscape and IE on RH8 and Win2K. Also just thinking you might want to have scrollbars set to auto. Mike Cheers, Mike --------------------------------------------------------------------------------------------------------- Hlade's Law: If you have a difficult task, give it to a lazy person -- they will find an easier way to do it. From chuck at horde.org Thu Jan 23 10:31:58 2003 From: chuck at horde.org (Chuck Hagenbuch) Date: Thu Jan 23 07:34:34 2003 Subject: [horde] Menus In-Reply-To: <200301231031080133.02F30ABF@relais.videotron.ca> References: <200301231031080133.02F30ABF@relais.videotron.ca> Message-ID: <1043335918.178f088f140b8@marina.horde.org> Quoting "Michael J. Pawlowsky" : > I did some CVS updates and now the menus do not collapse for me any more. > Anyone else experiencing this? No problems here. IE6/Moz 1.0. > Also just thinking you might want to have scrollbars set to auto. Patch? -chuck -- Charles Hagenbuch, must ... find ... acorns ... *thud* From mikejp at videotron.ca Thu Jan 23 11:33:08 2003 From: mikejp at videotron.ca (Michael J. Pawlowsky) Date: Thu Jan 23 08:32:17 2003 Subject: [horde] Menus In-Reply-To: <1043335918.178f088f140b8@marina.horde.org> References: <200301231031080133.02F30ABF@relais.videotron.ca> <1043335918.178f088f140b8@marina.horde.org> Message-ID: <200301231133080370.000CA2A6@relais.videotron.ca> Well if was the