[horde] Fwd: Re: [doc] NSTALL document and wvHtml installation.

[M Z Rahman]

Okay, seems like nobody has marked it. Am i wrong somewhere? or this doesn't at
all qualify? :)

Zia

Quoting M Z Rahman <zrahman at partex.net>:

> 
> I think this should actually be submitted in this list.
> 
> Zia
> 
> ----- Forwarded message from M Z Rahman <zrahman at partex.net> -----
>     Date: Tue,  9 Oct 2001 09:14:57 +0000
>     From: M Z Rahman <zrahman at partex.net>
> Reply-To: doc at lists.horde.org
>  Subject: Re: [doc] NSTALL document and wvHtml installation.
>       To: doc at lists.horde.org
> 
> Okay, here are the other documentation fix for the Horde INSTALL document:
> 
> 1. In the PHP Extentions header mcrypt link:
> 
> mcrypt - http://mcrypt.hellug.gr/
> 
> 2. Mcrypt installation:
> 
> mcrypt
> ------
> 
> Note: get the Libmcrypt library (libmcrypt-2.4.17.tar.gz)from
> ftp://mcrypt.hellug.gr/pub/mcrypt/libmcrypt, not the Mcrypt.
> 
> "cd to the directory containing your source files: cd..
> 
> Untar the libmcrypt source: tar -zxvf libmcrypt*
> 
> "cd" to the libmcrypt directory: cd libmcrypt*
> 
> Type the following:
> 
> ./configure
> make
> make install
> 
> 
> 3. While configuring PHP4 from the CVS, if the libtool version is less then
> 1.4
> then it will generate an error. A note can specified in the PHP4
> installation
> section, mentioning to install the latest libtool (at least,
> libtool-1.4.2).
> 
> -----this can be added-----
> Note: if you have older than version 1.4 of libtool then, please upgrade
> the
> libtool before you can proceed to configuring PHP4. Libtool can be grabbed
> from
> http://www.gnu.org/software/libtool/libtool.html. After installing
> thelibtool,
> besure copy the "ltconfig" file to your PHP4 src directory from
> /usr/share/libtool (if you installed libtool with default settings)
> directory.
> PHP4 complains about the "ltconfig" file if it is not in the current
> directory.
> ----Note finishes here-----
> 
> 4. With the mcrypt configured and installed, the confugre command for PHP4
> will be:
> 
> ./configure --with-zlib --with-mm --with-mysql=/usr/local/mysql \
> --with-mcal=../libmcal --with-ldap --with-imap=../imap \
> --with-gettext --enable-ftp --with-db3=/usr/local/BerkeleyDB.3.1 \
> --with-apache=../apache --with-mcrypt=../libmcrypt-1.4.2 
> 
> 5. PHP4 CVS version has a broken line in the configure script at 59514. So,
> while configuring it just gives an error and gets out. It is nothing but a
> echo
> line, and can be avoided by just putting a remark "#" in from of the line
> and
> the lines following. The note is specified below: (by the way, this is not
> a
> solutions, this is just a quick hack to get the PHP4 work for horde)
> 
> ----Note for broken line----
> Note: if configure script exits giving a error message "./configure: syntax
> error near unexpected token `_LT_AC_TRY_DLOPEN_SELF('" then you can aplly
> the
> following diff or you can just comment out the line 59514 to line 59521. 
> 
> Diff for the config file:
> 59514,59521c59514,59521
> < _LT_AC_TRY_DLOPEN_SELF(
> <   AC_MSG_RESULT(no)
> < ,
> <   AC_MSG_RESULT(yes)
> <   AC_DEFINE(DLSYM_NEEDS_UNDERSCORE, 1, [Define if dlsym() requires a
> leading underscode in symbol names. ])
> < ,
> <   AC_MSG_RESULT(no)
> < , )
> ---
> > #_LT_AC_TRY_DLOPEN_SELF(
> > #  AC_MSG_RESULT(no)
> > #,
> > #  AC_MSG_RESULT(yes)
> > #  AC_DEFINE(DLSYM_NEEDS_UNDERSCORE, 1, [Define if dlsym() requires a
> leading underscode in symbol names. ])
> > #,
> > #  AC_MSG_RESULT(no)
> > #, )
> 
> -----Note finishs here-----
> 
> 
> 6. After installing the mod_ssl, while configuring apache, the ./configure
> command should be the following for the ssl support as indicated by the
> mod_ssl
> installation:
> 
> EAPI_MM=/usr/local \
> SSL_BASE=../openssl-<your version> \
> --activate-module=src/modules/php4/libphp4.a \
> --enable-module=ssl (Leave this line and SSL_BASE line out is you are NOT
> installing mod_ssl)
> 
> 
> 
> Thats all I could think of so far. If I remember more, I will post it
> immediately. By the way, I am preparing the turba INSTALL documentation also,
> I
> hate to see it empty. :) (My turba still is not working, I am stuck at the
> login
> screen problem :)
> 
> Regards,
> 
> Zia
> 
> 
> Quoting Jon Parise <jon at horde.org>:
> 
> > On Sun, Oct 07, 2001 at 02:57:35PM +0600, M Z Rahman wrote:
> > 
> > > I can give more suggestions on the INSTALL document which might help
> others
> > to
> > > install it properly. Like the document does not at all talk about the
> > mcrypt
> > > installation, where as the test.php shows a RED "NO" about mcrypt,
> which
> > is
> > > really eye-catching :)
> >  
> > Go for it. =)
> > 
> > -- 
> > Jon Parise (jon at csh.rit.edu)  .  Information Technology (2001)
> > http://www.csh.rit.edu/~jon/  :  Computer Science House Member
> > 
> > -- 
> > Doc mailing list: http://docs.horde.org/
> > Frequently Asked Questions: http://horde.org/faq/
> > To unsubscribe, mail: doc-unsubscribe at lists.horde.org
> > 
> 
> -- 
> Doc mailing list: http://docs.horde.org/
> Frequently Asked Questions: http://horde.org/faq/
> To unsubscribe, mail: doc-unsubscribe at lists.horde.org
> 
> ----- End forwarded message -----
> 
> 
> 
> 
> -- 
> Horde mailing list: http://horde.org/horde/
> Frequently Asked Questions: http://horde.org/faq/
> To unsubscribe, mail: horde-unsubscribe at lists.horde.org
>