[horde] Problems with Horde Cache after upgrading to Webmail 5.2.12

Thu Feb 11 04:16:30 UTC 2016

Am 10.02.2016 um 16:13 schrieb Arjen de Korte:
> Citeren Jan Schneider <jan at horde.org>:
>
>> Zitat von Anton Köstlbacher <horde3 at dingsbums.org>:
>>
>>> Am 10.02.2016 um 12:04 schrieb Jan Schneider:
>>>>
>>>> Zitat von Anton Köstlbacher <horde3 at dingsbums.org>:
>>>>
>>>>> Am 10.02.2016 um 09:57 schrieb Jan Schneider:
>>>>>>
>>>>>> Zitat von Anton Köstlbacher <horde3 at dingsbums.org>:
>>>>>>
>>>>>>> Am 09.02.2016 um 15:36 schrieb Jan Schneider:
>>>>>>>>
>>>>>>>> Zitat von Anton Köstlbacher <horde3 at dingsbums.org>:
>>>>>>>>
>>>>>>>>> Dear List,
>>>>>>>>>
>>>>>>>>> a few hours after upgrading I couldn't login to my Horde Webmail.
>>>>>>>>>
>>>>>>>>> Error meesage was "couldn't write to cache". Reason was horde
>>>>>>>>> cache
>>>>>>>>> used up all space on the volume.
>>>>>>>>>
>>>>>>>>> Horde cache was set up as filesystem cache on a 1GB tmpfs volume,
>>>>>>>>> which was sufficient the last years. Lifetime was set to 43200
>>>>>>>>> seconds.
>>>>>>>>>
>>>>>>>>> I changed it to 2GB. This is now sufficient for about two days,
>>>>>>>>> then
>>>>>>>>> it's full again.
>>>>>>>>>
>>>>>>>>> Did anything change regarding cache expiration?
>>>>>>>>>
>>>>>>>>> Looks like it doesn't work anymore. I also replaced
>>>>>>>>> pear/Console_Getopt with pear/Console_GetoptPlus during the
>>>>>>>>> update.
>>>>>>>>>
>>>>>>>>> Thanks in advance!
>>>>>>>>>
>>>>>>>>> Anton
>>>>>>>>> --
>>>>>>>>> Horde mailing list
>>>>>>>>> Frequently Asked Questions: http://horde.org/faq/
>>>>>>>>> To unsubscribe, mail: horde-unsubscribe at lists.horde.org
>>>>>>>>
>>>>>>>> Actually the opposite was fixed in the latest Horde_Cache release.
>>>>>>>> Under
>>>>>>>> certain circumstances garbage collection didn't work, and it should
>>>>>>>> work
>>>>>>>> now in all cases.
>>>>>>>>
>>>>>>>> No idea why you mention Console_Getopt.
>>>>>>>>
>>>>>>>> You can try running the unit tests as a first measure, to see if
>>>>>>>> they
>>>>>>>> succeed for you:
>>>>>>>>
>>>>>>>> pear install horde/Horde_Test
>>>>>>>> php $(pear config-get
>>>>>>>> test_dir)/Horde_Cache/Horde/Cache/AllTests.php
>>>>>>>
>>>>>>> Hi Jan,
>>>>>>>
>>>>>>> thanks for your quick reply. I mentioned Console_Getopt just because
>>>>>>> it was the only other thing that changed since the problem occurred.
>>>>>>>
>>>>>>> Output of unit tests, they don't succeed:
>>>>>>>
>>>>>>> PHPUnit 4.5.0 by Sebastian Bergmann and contributors.
>>>>>>>
>>>>>>> F.FFFFFFSSSSSSSS...................SSSSSSSS........SSSSSSSS....
>>>>>>> 63 /
>>>>>>> 123 ( 51%)
>>>>>>> ....SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSPHP Warning:  Uncaught
>>>>>>> Undefined variable: reason
>>>>>>>
>>>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/Sql/Pdo/SqliteTest.php:30
>>>>>>>
>>>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:32
>>>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>>>
>>>>>>> thrown in
>>>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/Sql/Pdo/SqliteTest.php
>>>>>>> on
>>>>>>> line 30
>>>>>>> PHP Fatal error:  Cannot access empty property in
>>>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/Sql/Pdo/SqliteTest.php
>>>>>>> on
>>>>>>> line 30
>>>>>>>
>>>>>>> Any Ideas?
>>>>>>>
>>>>>>> Regards,
>>>>>>> Anton
>>>>>>
>>>>>> This had been fixed with
>>>>>> https://github.com/horde/horde/commit/00821173de24f83586aa3ff57dae5c3ea6f94c5f
>>>>>>
>>>>>>
>>>>>> already, but is hasn't been released yet. Please try this patch
>>>>>> manually.
>>>>>
>>>>> Ok, after patching I get this output from unit tests:
>>>>>
>>>>>
>>>>> PHPUnit 4.5.0 by Sebastian Bergmann and contributors.
>>>>>
>>>>> F.FFFFFFSSSSSSSS...................SSSSSSSS........SSSSSSSS....  63 /
>>>>> 123 ( 51%)
>>>>> ....SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
>>>>>
>>>>> Time: 214 ms, Memory: 7.50Mb
>>>>>
>>>>> There were 7 failures:
>>>>>
>>>>> 1) Horde_Cache_ApcTest::testReadWrite
>>>>> Failed asserting that false is true.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:40
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> 2) Horde_Cache_ApcTest::testExists
>>>>> Failed asserting that false is true.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:56
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> 3) Horde_Cache_ApcTest::testGet
>>>>> Failed asserting that false matches expected 'data1'.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:66
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> 4) Horde_Cache_ApcTest::testOutput
>>>>> Failed asserting that false is true.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:75
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> 5) Horde_Cache_ApcTest::testExpire
>>>>> Failed asserting that false matches expected 'data1'.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:83
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> 6) Horde_Cache_ApcTest::testClear
>>>>> Failed asserting that false matches expected 'data1'.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:91
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> 7) Horde_Cache_ApcTest::testCompress
>>>>> Failed asserting that false matches expected 'data1'.
>>>>>
>>>>> /usr/share/php/tests/Horde_Cache/Horde/Cache/TestBase.php:108
>>>>> /usr/share/php/Horde/Test/AllTests.php:84
>>>>>
>>>>> FAILURES!
>>>>> Tests: 123, Assertions: 111, Failures: 7, Skipped: 80.
>>>>
>>>> So no failures for the File backend that you use.
>>>>
>>>> Do you use the 'sub' setting? If yes, to you still have a
>>>> horde_cache_gc
>>>> file in the base directory?
>>>>
>>>
>>> I use the 'sub' setting (5) and there is no horde_cache_gc file in
>>> the base cache directory.
>>
>> But there are such files in the leaf directories, right? This means
>> that at least the migration from the old to the new GC technique
>> succeeded.
>>
>> You'll have to find out why GC'ing doesn't work for you anymore.
>> Depending on the traffic of your site, you may want to raise the GC
>> probability in __destruct(). Next you should check if _getGCFiles()
>> (called from _gc()) really returns a valid list of horde_cache_gc
>> files from your leaf directories.
>
> Which at sub setting (5) means that this list may potentially contain
> 16^5 = 1048576 entries. I doubt you'll have configured enough memory to
> store this list. So chances are the process runs out of memory before
> GC'ing actually takes place.

I reduced to 3 now. Before updating horde_cache it worked perfectly with 
5 levels for years.

>>> (Additionally I use 'use_memorycache' (APC) as separate memory cache
>>> driver)
>>
>>
>>
>> --
>> Jan Schneider
>> The Horde Project
>> http://www.horde.org/
>>
>> --
>> Horde mailing list
>> Frequently Asked Questions: http://horde.org/faq/
>> To unsubscribe, mail: horde-unsubscribe at lists.horde.org
>
>
>