[horde] horde Digest, Vol 5097, Issue 1
info at interpost.biz
info at interpost.biz
Thu Jul 5 22:05:59 UTC 2018
Hello,
Please stop using incorrect English:
final release means "last" release - that is to say - there will be no
more upgrades or releases.
You should say "latest" release.
This is standard English terminology for web development. PLease use
accepted standards for clarity.
Thank you.
Ed
Quoting :[1]
> Send horde mailing list submissions to
> [1]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> [2]
> or, via email, send a message with subject or body 'help' to
> [3]
>
> You can reach the person managing the list at
> [1]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of horde digest..."
>
> Today's Topics:
>
> 1. Horde 5.2.18 (final) (Michael J Rubinsky)
> 2. Re: Problem with "Check for newer versions" (poubeline at free.fr)
> 3. Wrong upgrade notifications (Ferdinand Gruber)
> 4. Current preferred stack for Horde (Lester Caine)
> 5. Re: Resume multiple draft emails will loss email
> (Nethub Online - Ming)
> 6. Trouble with horde-translation after upgrade to Horde 5.2.18
> (Jens Wahnes)
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 04 Jul 2018 13:47:36 -0400
> From: Michael J Rubinsky <[4]mrubinsk at horde.org>
> To: announce at lists.horde.org, vendor at lists.horde.org,
>
> Subject: [horde] Horde 5.2.18 (final)
> Message-ID: <[2]20180704134736.Horde.8BvQ-hd05mwCB0finv-VZ_y at 127.0.0.1>
> Content-Type: text/plain; charset=utf-8; format=flowed; DelSp=Yes
>
> The Horde Team is pleased to announce the final release of the Horde
> Application Framework version 5.2.18.
>
> The Horde Application Framework is a flexible, modular, general-purpose web
> application framework written in PHP. It provides an extensive array of
> components that are targeted at the common problems and tasks involved in
> developing modern web applications. It is the basis for a large number of
> production-level web applications, notably the Horde Groupware suites.
> For more
> information on Horde or the Horde Groupware suites, visit
> http://www.horde.org.
>
> For upgrading instructions, please see
>
> For detailed installation and configuration instructions, please see[5]
>
> The major changes compared to the Horde version 5.2.17 are:
> * Fix dynamically updating menu entries with a _target.
> * Check for both the memcache and memcached extensions in test script.
> * Small bugfixes and improvements.
>
> The full list of changes can be viewed here:[5]
>
> Have fun!
>
> The Horde Team.
>
> ------------------------------
>
> Message: 2
> Date: Thu, 5 Jul 2018 10:03:24 +0200 (CEST)
> From: [6]poubeline at free.fr
> To:
> Subject: Re: [horde] Problem with "Check for newer versions"
> Message-ID:
>
> <[2]1149973027.84604991.1530777804341.JavaMail.root at zimbra1-e1.priv.proxad.net>
>
> Content-Type: text/plain; charset=utf-8
>
> Hi,
>
> I come back to this issue as I still did not get any help on this.
>
> I did the latests upgrades to Horde 5.2.18 and IMP to 6.2.22 and I
> am still having the issue that I cannot contact the server in the
> Administration panel when I click on the 'Check for newer versions'
> button.
> Can someone help me figure out what is really going on as I did
> trace Horde Webmail in DEBUG mode and nothing appeared ?
>
> Thanks
>
> ----- Mail original -----
>
> De: poubeline at free.fr
> ?:
> Envoy?: Vendredi 29 Juin 2018 13:51:57
> Objet: Re: [horde] Problem with "Check for newer versions"
>
> Hi All,
>
> I am facing the exact same issue but did not trace the certificate
> issue with tcpdump.
> If someone can help me make this trace with tcpdump to ensure I get
> the same certificate problem, that will be really appreciated.
> On another hand, if there is already a fix for that, can you provide
> it to me also ?
>
> Thanks for your help,
> Laurent
>
> ----- Mail original -----
>
> De: "Matze" <[2]hordelist at lauchaecker.de>
> ?:
> Envoy?: Jeudi 26 Avril 2018 13:46:53
> Objet: Re: [horde] Problem with "Check for newer versions"
>
> Hi,
>
> On 4/13/18 12:41 PM, Matze wrote: [2]
>> On 4/12/18 7:32 PM, Ralf Lang wrote: [2]
>>> Am 12.04.2018 um 17:29 schrieb Matze: [2]
>>>> "Could not contact server. Try again later."
>>>>
>>>> A tcpdump showed, that there is probably a problem with "unknown ca"
>>>> while connecting to [2]https://ftp.horde.org.> > you can
>>>> configure where Horde looks for your CA bundle.
>>
>> Ok, i did that and tried different entries for cafile, but neither
>> the directory /etc/ssl/certs nor the cacert.pem File with the
>> mozilla Root-CA Entries worked.
>>
>> The path for openssl binary is correct and the binary itself seems
>> to work without problems.
>>
>> So maybe there's another problem, why checking for newer versions fails?
>
> I tried different OpenSSL Versions and cafile-paths, but neither of
> them did work or made any differences in the behavior.
>
> I still get the error on "Check for newer versions": "Could not
> contact server. Try again later."
>
> Does anyone have an idea how to track down this error?
>
> TIA,
>
> Matze
>
>> On 4/12/18 7:32 PM, Ralf Lang wrote:
>>> Am 12.04.2018 um 17:29 schrieb Matze:
>>>> Hi everyone,
>>>>
>>>> i have set up a new Horde Installation which works well except:
>>>>
>>>> I experience a weird Problem when checking for newer versions via the
>>>> menu:
>>>>
>>>> Administration -> Configuration
>>>> "Check for newer versions"
>>>>
>>>> I get an error message popping up, saying:
>>>>
>>>> "Could not contact server. Try again later."
>>>>
>>>> A tcpdump showed, that there is probably a problem with "unknown ca"
>>>> while connecting to https://ftp.horde.org.
>>>>
>>>> Horde Debug Log doesn't show any error messages.
>>>>
>>>> Mine is a Ubuntu server which has the "ISRG Root CA" in /etc/ssl/certs
>>>>
>>>> But maybe horde uses another Source for validating?
>>>>
>>>> Is there a better way to debug that issue?
>>>>
>>>> - Horde installed via PEAR
>>>> o Version Groupware 5.2.22
>>>> - Ubuntu 14.04.5 LTS
>>>> - Apache 2.4.7
>>>> - PHP 5.5.9
>>>>
>>>> Regards,
>>>>
>>>> Matze
>>>
>>> Hi Matze,
>>>
>>> you can configure where Horde looks for your CA bundle.
>
> --
> Horde mailing list
> Frequently Asked Questions: http://horde.org/faq/
> To unsubscribe, mail:
>
> --
> Horde mailing list
> Frequently Asked Questions: [7]http://horde.org/faq/
> To unsubscribe, mail:
>
> ------------------------------
>
> Message: 3
> Date: Thu, 5 Jul 2018 10:40:01 +0200
> From: Ferdinand Gruber <[7]fer.grub at yahoo.de>
> To:
> Subject: [horde] Wrong upgrade notifications
> Message-ID: <[2]810b5aa9-3196-c2d1-552f-459b4b408fa7 at yahoo.de>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Hi,
>
> on the Administration page of Horde Groupware, I see that there are
> several new modules available, e.g. Horde_ActiveSync
>
> But after typing in the terminal:
>
> ??? pear upgrade horde/Horde_ActiveSync
>
> I get this message:
>
> ??? Nothing to upgrade
>
> This behaviour occurs with all modules beginning with Horde_ (e.g.
> Horde_ActiveSync, Horde_Auth, Horde_alarm, ... ).
>
> --
> Regards from Austria
> Ferdinand Gruber
>
> ------------------------------
>
> Message: 4
> Date: Thu, 5 Jul 2018 11:04:00 +0100
> From: Lester Caine <lester at lsces.co.uk>
> To:
> Subject: [horde] Current preferred stack for Horde
> Message-ID: <[2]b2e9c42d-9604-1585-2b9a-ae2f0d6ca24c at lsces.co.uk>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I've been slowly moving legacy sites to PHP7 which has become a tedious
> job when many are still running fine on PHP5.2, but the new servers only
> have PHP7.0.x currently and I need everything working on that going
> forward. I HAVE had an install of horde running on one of the machines,
> but messed up between the initial admin access and creating users. I
> tried to 'reset' that, but without much success, so having a couple of
> other machines available just started again from a clean setup without
> any PEAR installed. I use my own PHP7 compliant PEAR with the websites
> so do not use the PEAR install normally. The second install did not go
> as expected and I'm not sure why. All machines are a clean SUSE42.3 base
> from the same disk, but now I have a working initial admin panel which
> complains about the 'secret key' when I try to update the main config file.
>
> Questions ...
> 1 - Knowing that PEAR is no longer 'flavour of the day' with the PHP
> development team, is Horde stable with PHP7?
> 2 - Alternatively, what is the preferred stack to run it?
> 3 - I'm looking mainly for a local email service that can mirror
> multiple email accounts and handle a now 40Gb archive of messages. Is
> Horde the right way to be going anyway? I think I was expecting a LOCAL
> login to be the default, and then connect to additional remote servers,
> but that does not seem to be the case?
>
> --
> Lester Caine - G8HFL
> -----------------------------
> Contact - http://lsces.co.uk/wiki/?page=contact
> L.S.Caine Electronic Services - http://lsces.co.uk
> EnquirySolve - http://enquirysolve.com/
> Model Engineers Digital Workshop - http://medw.co.uk
> Rainbow Digital Media - http://rainbowdigitalmedia.co.uk
>
> ------------------------------
>
> Message: 5
> Date: Thu, 5 Jul 2018 18:36:15 +0800
> From: Nethub Online - Ming <nethubonline at gmail.com>
> Cc:
> Subject: Re: [horde] Resume multiple draft emails will loss email
> Message-ID:
>
> <[2]CAFcwVtyfqEYSP5dfo+2WwTZZDDwGBX+ezYJFgYdTh3F4=w+R2A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> just for update, since horde just released a new version, so i tested it
> too and confirmed problem still exists.
>
> Horde Groupware: 5.2.22
> Horde: 5.2.18
> IMP: 6.2.22
>
> On 4 July 2018 at 19:54, Grouchy Sysadmin <sysadmin at grouchysysadmin.com>
> wrote:
>
>> On 07/03/2018 11:43 PM, Nethub Online - Ming wrote:
>>
>>> Yes, I tested again and confirmed Patrick is right, only lose drafts that
>>> I
>>> selected.
>>>
>>> Hope Horde team can fix it soon
>>
>> Confirmed here too. I lose any additional drafts selected.
>> --
>> Horde mailing list
>> Frequently Asked Questions: http://horde.org/faq/
>> To unsubscribe, mail:
>
> ------------------------------
>
> Message: 6
> Date: Thu, 5 Jul 2018 13:03:56 +0200
> From: Jens Wahnes <[7]wahnes at uni-koeln.de>
> To:
> Subject: [horde] Trouble with horde-translation after upgrade to Horde
> 5.2.18
> Message-ID: <[2]c68b8d47-a3e3-1d54-019d-d78b28f061b7 at uni-koeln.de>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> After upgrading to Horde 5.2.18 and the other packages released
> recently, I seem to be having trouble with the horde-translation helper
> application, which is part of the Horde package.
>
> For one, it now seems to use Horde_Yaml without having a dependency on
> it. While this is easy to fix (yet somewhat strange for a point release
> to pull in new dependencies), I still cannot run horde-translation even
> after "pear install horde/Horde_Yaml". It complains about not being able
> to open a ".horde.yml" file:
>
> ---------------------------
> Horde translation generator
> ---------------------------
> Loading libraries...
> [ OK ] Console_Getopt found.
> [ OK ] Console_Table found.
> [ OK ] File_Find found.
>
> Searching gettext binaries...
> [ OK ] gettext found: /bin/gettext
> [ OK ] msgattrib found: /usr/bin/msgattrib
> [ OK ] msgcat found: /usr/bin/msgcat
> [ OK ] msgcomm found: /usr/bin/msgcomm
> [ OK ] msgfmt found: /usr/bin/msgfmt
> [ OK ] msginit found: /usr/bin/msginit
> [ OK ] msgmerge found: /usr/bin/msgmerge
> [ OK ] xgettext found: /usr/bin/xgettext
>
> [ OK ] gettext version: 0.17
>
> Searching Horde modules in /[...]/lib/..
>
> Fatal Error:
> Failed to open file:
> fopen(/[...]/lib/../.horde.yml): failed to open
> stream: No such file or directory
> In /usr/share/pear/Horde/Yaml.php on line 105
>
> 1. Horde_Translation_Script->search_modules()
> /usr/bin/horde-translation:1682
> 2. Horde_Translation_Script->strip_horde() /usr/bin/horde-translation:391
> 3. array_map() /usr/bin/horde-translation:405
> 4. Horde_Translation_Script->strip_horde()
> 5. Horde_Yaml::loadFile() /usr/bin/horde-translation:407
>
> It seems that I can still do what I need to do (generate MO files for
> all translation files that I fiddle with locally) when calling the old
> version of horde-translation. I don't use the Git stuff that replaced
> CVS stuff which was present in the older version of horde-translation,
> so that this workaround is OK for me, but of course I'd prefer to use a
> version that is shipped with a current Horde package.
>
> Is it intentional that Horde_Yaml is now being used? Or maybe just some
> version of horde-translation intented for Horde 6 slipped into the Horde
> 5 tree? I haven't seen a ".horde.yml" file anywhere (it's not part of
> what "pear list-files horde/Horde" shows), so I really don't know where
> this file would come from. What's the best way to deal with this situation?
>
> Jens
>
> ------------------------------
>
> Subject: Digest Footer
>
> --
> Horde mailing list
> Frequently Asked Questions: http://horde.org/faq/
> To unsubscribe, mail:
>
> ------------------------------
>
> End of horde Digest, Vol 5097, Issue
> 1**************************************[7]
Links:
------
[1] mailto:horde-request at lists.<span%20index=
[2] mailto:horde at lists.<span%20index=
[3] https://lists.horde.org/mailman/listinfo/<span%20index=
[4] mailto:horde-owner at lists.<span%20index=
[5] http://www.horde.org/apps/<span%20index=
[6] https://github.com/horde/<span%20index=
[7] mailto:horde-unsubscribe at lists.<span%20index=
More information about the horde
mailing list