[horde] Installation Help

Sun Oct 10 11:18:43 PDT 2004

Thomas, thanks for the reply.  I installed/upgraded all the pear modules
that were listed but I still unable to display the
Administration==>Configuration screen.

Using IMP as an example, the config directory has a conf.xml but no conf.php
file.  All the files .php.dist have been copied over to .php

The only .php files in horde are index.php, login.php, rpc.php, test.php and
signup.php.  What are the conditions that would cause admin to be displayed?
I tried to read the code but I couldn't determine this.

---- Begin test.php
Horde Version
Horde: 3.0-cvs
Horde Applications
Accounts: 3.0-cvs (run Accounts tests)
Forwards: 3.0-cvs
Giapeto: 0.1-cvs (run Giapeto tests)
Hermes: 0.1-cvs
Horde: 3.0-cvs
Imp: 4.0-cvs (run Imp tests)
Jonah: 0.1-cvs (run Jonah tests)
Klutz: 1.0-cvs
Kronolith: 2.0-cvs
Mnemo: 2.0-cvs
Nag: 2.0-cvs
Passwd: 3.0-cvs
Turba: 2.0-cvs (run Turba tests)
Ulaform: 0.1-cvs (run Ulaform tests)
Vacation: 3.0-cvs
Whups: 1.0-cvs
PHP Version
View phpinfo() screen
View loaded extensions
PHP Version: 4.3.4
PHP Major Version: 4.3
PHP Minor Version: 4
PHP Version Classification: release
You are running a supported version of PHP.
PHP Module Capabilities
Ctype Support: Yes
DOM XML Support: Yes
FTP Support: Yes
GD Support: Yes
Gettext Support: Yes
Iconv Support: Yes
IMAP Support: Yes
LDAP Support: Yes
Mbstring Support: Yes
MCAL Support: Yes
Mcrypt Support: Yes
MIME Magic Support: No
The fileinfo PECL module is recommended for use with Horde as it will
provide faster MIME Magic lookups. See horde/docs/INSTALL for information on
how to install PECL extensions.
MySQL Support: Yes
OpenSSL Support: Yes
PostgreSQL Support: No
XML Support: Yes
Zlib Support: Yes
Miscellaneous PHP Settings
magic_quotes_runtime disabled: Yes
memory_limit disabled: No
If PHP's internal memory limit is turned on and if not set high enough Horde
will not be able to handle large data items (e.g. large mail attachments in
IMP). If possible, you should disable the PHP memory limit by recompiling
PHP without the "--enable-memory-limit" flag. If this is not possible, then
you should set the value of memory_limit in php.ini to a sufficiently high
value (Current value of memory_limit: 8M).
file_uploads enabled: Yes
safe_mode disabled: Yes
session.use_trans_sid disabled: Yes
Required Horde Configuration Files
config/conf.php: Yes
config/html.php: Yes
config/mime_drivers.php: Yes
config/nls.php: Yes
config/prefs.php: Yes
config/registry.php: Yes
PHP Sessions
Session counter: 4
To unregister the session: click here
PEAR
PEAR Search Path (PHP's include_path):  .:/usr/lib/php/:/usr/share/pear/
PEAR: Yes
Recent PEAR: Yes
Mail_RFC822: Yes
Mail_Mime: Yes
Log: Yes
DB: Yes
Net_Socket: Yes
Date: Yes
Auth_SASL: Yes
HTTP_Request: Yes
File: Yes
Net_SMTP: Yes
Services_Weather: Yes
---- End test.php

-----Original Message-----
From: horde-bounces at lists.horde.org
[mailto:horde-bounces at lists.horde.org]On Behalf Of Thomas O'Brien
Sent: Sunday, October 10, 2004 12:50 PM
To: horde at lists.horde.org
Subject: Re: [horde] Installation Help

Looking at the output of test.php there are a number of PEAR modules
that aren't
installed. You might want to start there.

Thomas

Quoting "H. Carter Harris" <carter-lists at technettn.net>:

> I can't get the Administration==>Configuration screen described in several
> documents on horde.org.
>
> I used the HordeHEADHowTo from the wiki to download and setup the modules
I
> wanted on Friday.  Output from test.php is copied below:
>
> -----Begin Test.php output
> Horde Version
> Horde: 3.0-cvs
> Horde Applications
> Accounts: 3.0-cvs (run Accounts tests)
> Forwards: 3.0-cvs
> Giapeto: 0.1-cvs (run Giapeto tests)
> Hermes: 0.1-cvs
> Horde: 3.0-cvs
> Imp: 4.0-cvs (run Imp tests)
> Jonah: 0.1-cvs (run Jonah tests)
> Klutz: 1.0-cvs
> Kronolith: 2.0-cvs
> Mnemo: 2.0-cvs
> Nag: 2.0-cvs
> Passwd: 3.0-cvs
> Turba: 2.0-cvs (run Turba tests)
> Ulaform: 0.1-cvs (run Ulaform tests)
> Vacation: 3.0-cvs
> Whups: 1.0-cvs
> PHP Version
> View phpinfo() screen
> View loaded extensions
> PHP Version: 4.3.4
> PHP Major Version: 4.3
> PHP Minor Version: 4
> PHP Version Classification: release
> You are running a supported version of PHP.
> PHP Module Capabilities
> Ctype Support: Yes
> DOM XML Support: Yes
> FTP Support: Yes
> GD Support: Yes
> Gettext Support: Yes
> Iconv Support: Yes
> IMAP Support: Yes
> LDAP Support: Yes
> Mbstring Support: Yes
> MCAL Support: Yes
> Mcrypt Support: Yes
> MIME Magic Support: No
> The fileinfo PECL module is recommended for use with Horde as it will
> provide faster MIME Magic lookups. See horde/docs/INSTALL for information
on
> how to install PECL extensions.
> MySQL Support: Yes
> OpenSSL Support: Yes
> PostgreSQL Support: No
> XML Support: Yes
> Zlib Support: Yes
> Miscellaneous PHP Settings
> magic_quotes_runtime disabled: Yes
> memory_limit disabled: No
> If PHP's internal memory limit is turned on and if not set high enough
Horde
> will not be able to handle large data items (e.g. large mail attachments
in
> IMP). If possible, you should disable the PHP memory limit by recompiling
> PHP without the "--enable-memory-limit" flag. If this is not possible,
then
> you should set the value of memory_limit in php.ini to a sufficiently high
> value (Current value of memory_limit: 8M).
> file_uploads enabled: Yes
> safe_mode disabled: Yes
> session.use_trans_sid disabled: Yes
> Required Horde Configuration Files
> config/conf.php: Yes
> config/html.php: Yes
> config/mime_drivers.php: Yes
> config/nls.php: Yes
> config/prefs.php: Yes
> config/registry.php: Yes
> PHP Sessions
> Session counter: 1
> To unregister the session: click here
> PEAR
> PEAR Search Path (PHP's include_path):  .:/usr/lib/php/:/usr/share/pear/
> PEAR: Yes
> Recent PEAR: Yes
> Mail_RFC822: Yes
> Mail_Mime: Yes
> Log: Yes
> DB: Yes
> Net_Socket: Yes
> Date: No
> Horde requires the Date_Calc class for Kronolith to calculate dates.
> Auth_SASL: No
> Horde will work without the Auth_SASL class, but if you use Access Control
> Lists in IMP you should be aware that without this class passwords will be
> sent to the IMAP server in plain text when retrieving ACLs.
> HTTP_Request: No
> Parts of Horde (Jonah, the XML-RPC client/server) use the HTTP_Request
> library to retrieve URLs and do other HTTP requests.
> File: No
> Horde will work without the File_CSV class, but there may be errors when
> importing some CSV files.
> Net_SMTP: Yes
> Services_Weather: No
> Services_Weather is used by the weather applet/block on the portal page.
> ----- End Test.php output
>
> When I try to execute the default, I never get the screen referenced
several
> times that allows me to configure the system.  Most of the modules, have
> config.xml files but I need the Administration-->Configuration screen that
> allows me to do use the conf.xml file.
>
> I would appreciate any suggestions.
>
> Carter
>
>
> --
> Horde mailing list - Join the hunt: http://horde.org/bounties/#horde
> Frequently Asked Questions: http://horde.org/faq/
> To unsubscribe, mail: horde-unsubscribe at lists.horde.org
>

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

--
Horde mailing list - Join the hunt: http://horde.org/bounties/#horde
Frequently Asked Questions: http://horde.org/faq/
To unsubscribe, mail: horde-unsubscribe at lists.horde.org