[horde] How can I setup sieve in Horde Groupware Webmail Edition 5.0.2?
"[SOLTECSIS] Carles Xavier Munyoz Baldó"
carles at unlimitedmail.org
Wed Dec 5 08:31:14 UTC 2012
On 05/12/12 00:07, neys wrote:
> On 12/04/2012 11:33 AM, Simon Wilson wrote:
>> ----- Message from "[SOLTECSIS] Carles Xavier Munyoz Baldó"
>> <carles at unlimitedmail.org> ---------
>> Date: Tue, 04 Dec 2012 10:18:31 +0100
>> From: "[SOLTECSIS] Carles Xavier Munyoz Baldó" <carles at unlimitedmail.org>
>> Subject: Re: [horde] How can I setup sieve in Horde Groupware Webmail
>> Edition 5.0.2?
>> To: horde at lists.horde.org
>>
>>
>>> On 04/12/12 02:14, Simon Wilson wrote:
>>>>>> This is the contents of my ingo/config/backends.local.php file:
>>>>>> [...]
>>>>>> <?php
>>>>>> $backends['sieve'] = array(
>>>>>> 'disabled' => false,
>>>>>> 'transport' => 'timsieved',
>>>>>> 'preferred' => '10.99.4.151',
>>>>>> 'params' => array(
>>>>>> // Hostname of the timsieved server
>>>>>> 'hostspec' => '10.99.4.151',
>>>>>> // Login type of the server
>>>>>> //'logintype' => 'PLAIN',
>>>>>> //'logintype' => 'CRAM-MD5',
>>>>>> 'logintype' => 'DIGEST-MD5',
>>>>>> // Enable/disable TLS encryption
>>>>>> 'usetls' => true,
>>>>>> // Port number of the timsieved server
>>>>>> 'port' => 4190,
>>>>>> // Name of the sieve script
>>>>>> 'scriptname' => 'ingo',
>>>>>> // Enable debugging. With Net_Sieve 1.2.0 or later, the sieve
>>>>>> protocol
>>>>>> // communication is logged with the DEBUG level. Earlier versions
>>>>>> // print the log to the screen.
>>>>>> 'debug' => false,
>>>>>> ),
>>>>>> 'script' => 'sieve',
>>>>>> 'scriptparams' => array(
>>>>>> // If using Dovecot or any other Sieve implementation that
>>>>>> requires
>>>>>> // folder names to be UTF-8 encoded, set this parameter to true.
>>>>>> 'utf8' => false,
>>>>>> ),
>>>>>> 'shares' => false
>>>>>> );
>>>>>> [...]
>>>>>>
>>>>>> Is it correct?
>>>>>>
>>>>>> Best regards.
>>>>>
>>>>> Mine is as follows. Note that I was completely unable to get it
>>>>> working with TLS on mine. Every other Horde app successfully uses TLS
>>>>> for me, but Sieve just always point blank refused in my setup:
>>>>>
>>>>> <?php
>>>>> $backends['imap']['disabled'] = true;
>>>>> $backends['sieve']['disabled'] = false;
>>>>> $backends['sieve'] = array(
>>>>> 'disabled' => false,
>>>>> 'transport' => 'timsieved',
>>>>> 'hordeauth' => true,
>>>>> 'params' => array(
>>>>> 'hostspec' => 'server04.simonandkate.lan',
>>>>> 'logintype' => 'PLAIN',
>>>>> 'usetls' => false,
>>>>> 'port' => 2000,
>>>>> 'scriptname' => 'ingo',
>>>>> 'debug' => true,
>>>>> ),
>>>>> 'script' => 'sieve',
>>>>> 'scriptparams' => array(
>>>>> 'utf8' => false,
>>>>> ),
>>>>> 'shares' => false
>>>>> );
>>>>>
>>>>> Simon
>>>>
>>>> From just doing some re-reading around the 'net it appears that Sieve
>>>> TLS in cyrus-imapd is broken, and I think fixed in 2.3.10 (happy for
>>>> anyone else to chip in here!). My CentOS 5.8 mail server runs
>>>> cyrus-imapd 2.3.7, and things fail when you try and access sieve
>>>> using TLS.
>>>>
>>>> Which IMAP server are you using? What version?
>>>>
>>>> Simon
>>>
>>> Hello,
>>> Now I get communication with Cyrus Sieve daemon, but I have problems
>>> with the authentication.
>>> I always get the error of authentication failure.
>>> I'm using Cyrus 2.4.12.
>>>
>>> Thie is my ingo/config/backends.local.php file now:
>>> [...]
>>> <?php
>>> $backends['imap']['disabled'] = true;
>>> $backends['sieve']['disabled'] = false;
>>> $backends['sieve'] = array(
>>> 'disabled' => false,
>>> 'transport' => 'timsieved',
>>> 'preferred' => '10.99.4.151',
>>> 'hordeauth' => false,
>>> 'params' => array(
>>> // Hostname of the timsieved server
>>> 'hostspec' => '10.99.4.151',
>>> // Login type of the server
>>> 'logintype' => 'PLAIN',
>>> //'logintype' => 'CRAM-MD5',
>>> //'logintype' => 'DIGEST-MD5',
>>> // Enable/disable TLS encryption
>>> 'usetls' => false,
>>> // Port number of the timsieved server
>>> 'port' => 4190,
>>> // Name of the sieve script
>>> 'scriptname' => 'ingo',
>>> // Enable debugging. With Net_Sieve 1.2.0 or later, the sieve protocol
>>> // communication is logged with the DEBUG level. Earlier versions
>>> // print the log to the screen.
>>> 'debug' => false,
>>> ),
>>> 'script' => 'sieve',
>>> 'scriptparams' => array(
>>> // If using Dovecot or any other Sieve implementation that requires
>>> // folder names to be UTF-8 encoded, set this parameter to true.
>>> 'utf8' => true,
>>> ),
>>> 'shares' => false
>>> );
>>> [...]
>>>
>>> May someone help?
>>>
>>> Best regards.
>>>
>>>
>>>
>>
>> Is there any useful information in the maillog from cyrus? How do you
>> have cyrus auth setup? Can you auth to Cyrus any other way, i.e. IMAP?
>>
>> Simon
>>
>
> Hi Charles,
>
> I use
>
>> 'logintype' => 'PLAIN',
>> 'usetls' => true,
>
> in my ingo/config/backends.local.php, but I also had authentication
> problems. I could no longer find the parameter 'hordeauth' in
> backends.php. I could get it up running with the following hook in
> ingo/config/hooks.local.php:
>
>>
>> <?php
>> class Ingo_Hooks
>> {
>> public function transport_auth($driver)
>> {
>> switch ($driver) {
>> case 'timsieved':
>> $ob = $GLOBALS['registry']->call('mail/imapOb');
>> return array(
>> 'password' => $ob->getParam('password'),
>> 'username' => $ob->getParam('username')
>> );
>> }
>> return true;
>> }
>> }
>
> I do not know any problems with Cyrus Sieve and TLS, using
> cyrus-imapd-2.2.13-19+squeeze3 on Debian 6.0.6 works fine for me.
>
> Neys
>
I'm sorry, I posted a wrong version of my backends.local.php file. This
is the right one, with tls and DIGEST-MD5 authentication:
[...]
<?php
$backends['imap']['disabled'] = true;
$backends['sieve']['disabled'] = false;
$backends['sieve'] = array(
'disabled' => false,
'transport' => 'timsieved',
'preferred' => '10.99.4.151',
'params' => array(
// Hostname of the timsieved server
'hostspec' => '10.99.4.151',
// Login type of the server
//'logintype' => 'PLAIN',
//'logintype' => 'CRAM-MD5',
'logintype' => 'DIGEST-MD5',
// Enable/disable TLS encryption
'usetls' => true,
// Port number of the timsieved server
'port' => 4190,
// Name of the sieve script
'scriptname' => 'ingo',
// Enable debugging. With Net_Sieve 1.2.0 or later, the sieve
protocol
// communication is logged with the DEBUG level. Earlier versions
// print the log to the screen.
'debug' => false,
),
'script' => 'sieve',
'scriptparams' => array(
// If using Dovecot or any other Sieve implementation that requires
// folder names to be UTF-8 encoded, set this parameter to true.
'utf8' => false,
),
'shares' => false
);
[...]
========================================
SOLTECSIS SOLUCIONES TECNOLOGICAS, S.L.
Carles Xavier Munyoz Baldó
Departamento de Tecnología
Tel./Fax: 966 446 046
cmunyoz at soltecsis.com
www.soltecsis.com
========================================
---
La información contenida en este e-mail es confidencial,
siendo para uso exclusivo del destinatario arriba mencionado.
Le informamos que está totalmente prohibida cualquier
utilización, divulgación, distribución y/o reproducción de
esta comunicación sin autorización expresa en virtud de la
legislación vigente. Si ha recibido este mensaje por error,
le rogamos nos lo notifique inmediatamente por la misma vía
y proceda a su eliminación.
---
More information about the horde
mailing list