[imp] content issue

[Andy Rowe]

Ralf thank you so much for finding the time to help. The support team  
at pickaweb have responded with the following and asking what needs to  
be changed

specified file in the server contains the mentioned data:

===================================
$mime_drivers['imp']['plain'] = array(
     'inline' => true,
     'handles' => array('text/plain', 'text/rfc822-headers',  
'application/pgp'),
     /* If you want to scan ALL incoming messages for UUencoded data, set the
      * following to true. This is very performance intensive and can take a
      * long time for large messages. It is not recommended and is disabled by
      * default. */
     'uuencode' => false,
     /* If you want to limit the display of message data inline for large
      * messages, set the maximum size of the displayed message here (in
      * bytes).  If exceeded, the user will only be able to download the part.
      * Set to 0 to disable this check. */
     'limit_inline_size' => 1048576
);

Andy Rowe
Voice Artist Presenter Producer
Direct Event Services Ltd

Studio: +44 (0)118 969 9438
Mobile: +44 (0)7753 863 680
SKYPE: andy.rowe.voice
Website: www.voice-over.org.uk


NOTE: Please refer to our terms and conditions when confirming
a new voice over engagement. These can be found at
http://www.voice-over.org.uk/terms.html




Quoting Ralf Lang <lang at b1-systems.de>:

> Am Donnerstag 03 März 2011, 13:08:50 schrieben Sie:
>> Hi Ralf, I hope that you got my note and screen shots last night. I
>> have been told by pickaweb that I dont have ssh access.
>>
>> I have attached a shot from a mail today that again prevents content
>> being accessed
>>
>> I really hope you can help
>> Andy Rowe
>> Voice Artist Presenter Producer
>> Direct Event Services Ltd
>>
>> Studio: +44 (0)118 969 9438
>> Mobile: +44 (0)7753 863 680
>> SKYPE: andy.rowe.voice
>> Website: www.voice-over.org.uk
>>
>>
>> NOTE: Please refer to our terms and conditions when confirming
>> a new voice over engagement. These can be found at
>> http://www.voice-over.org.uk/terms.html
>>
>> Quoting Ralf Lang <lang at b1-systems.de>:
>> > Please keep discussion on the list.
>> > ----------  Forwarded ----------
>> >
>> > Betreff: Re: [imp] content issue
>> > Datum: Mittwoch 02 März 2011, 16:47:05
>> > Von: Andy Rowe <andy at voice-over.org.uk>
>> > An:  Ralf Lang <lang at b1-systems.de>
>> >
>> >> Hi Ralf thanks so much for offering help. This is where its going to get
>> >
>> > tough
>> >
>> >> I can tell you that when I click on help it says IMP H3 (4.3.9)
>> >>
>> >> I have looked on my cpanel file manager and I cant see the horde files
>> >> but that is not to say they are not there...any advice?.
>> >>
>> >> not sure how I would tell if I am using IMP view or DIMP view?
>> >>
>> >> all I see is the yourdomain home page
>> >
>> > -------------------------------------------------------------
>> >
>> > Do you have administrator privileges on your horde?
>> > Do you run an own server/vserver with cpanel?
>> > Do you have or can get ssh access (shell access) to the server? You can
>> > probably see that on cpanel.
>> >
>> > When you access the horde / imp app as before,
>> > do you see something like this?
>> >
>> > http://www.horde.org/webmail/screenshots/imp_1_1.png
>> > (imp)
>> >
>> > or this
>> > http://www.horde.org/webmail/screenshots/dimp_1_1.png
>> > (dimp)
>> >
>> >
>> >
>> > --
>> > Ralf Lang
>> > Linux Consultant / Developer
>> >
>> > B1 Systems GmbH
>> > Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de
>> > GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537
>> > --
>> > IMP mailing list
>> > Frequently Asked Questions: http://horde.org/faq/
>> > To unsubscribe, mail: imp-unsubscribe at lists.horde.org
>
> Hi Andy,
>
> I am currently very busy. Without access to your horde's files it is hard to
> analyse, but usually it boils down to a default setting in the file
> $hordepath/imp/config/mime_drivers.php
>
> somewhere around the section
>
> /**
>  * Text driver settings
>  */
> $mime_drivers['imp']['plain'] = array(
>     'inline' => true,
>     'handles' => array('text/plain', 'text/rfc822-headers',
> 'application/pgp'),
>     /* If you want to scan ALL incoming messages for UUencoded data, set the
>      * following to true. This is very performance intensive and can take a
>      * long time for large messages. It is not recommended and is disabled by
>      * default. */
>     'uuencode' => false,
>     /* If you want to limit the display of message data inline for large
>      * messages, set the maximum size of the displayed message here (in
>      * bytes).  If exceeded, the user will only be able to download the part.
>      * Set to 0 to disable this check. */
>
> You will need to ask your company clickaweb how you can access this  
> file or if
> they will make the change for you.
>
> Another solution would be to install a separate instance of horde in the part
> of your webserver where you have full access. If you do not have the  
> technical
> knowledge how to do that, I'm sure you can find some paid assistance.
>
> So far,
>
> Ralf
>
> --
> ***
> Besuchen Sie uns auf der CeBIT 2011!
> Im Open Source Park in Halle 2, Stand-Nr.: D44/133 zeigen wir
> "Virtual System Cluster" und "Infrastructure Cloud mit OpenStack".
> Am Mittwoch laden wir von 9:00 - 11:59 Uhr zum Weißwurstfrühstück ein.
> ***
>
> Ralf Lang
> Linux Consultant / Developer
> Tel.: +49-170-6381563
> Mail: lang at b1-systems.de
>
> B1 Systems GmbH
> Osterfeldstraße 7 / 85088 Vohburg / http://www.b1-systems.de
> GF: Ralph Dehner / Unternehmenssitz: Vohburg / AG: Ingolstadt,HRB 3537
>