[horde] Upgrading to 4 from Groupware 1.2.9

[Simon Brereton]

> -----Original Message-----
> From: horde-bounces at lists.horde.org [mailto:horde-
> bounces at lists.horde.org] On Behalf Of Brian Spraker
> ----- Original Message -----
> > From: Vilius Šumskas <vilius at lnk.lt>
> > To: "horde at lists.horde.org" <horde at lists.horde.org>
> > Cc:
> > Sent: Friday, October 7, 2011 4:20 PM
> > Subject: Re: [horde] Upgrading to 4 from Groupware 1.2.9
> >
> > Brian Spraker <spraker at yahoo.com> rašė:
> >
> >>  ----- Original Message -----
> >>>  From: Vilius Šumskas <vilius at lnk.lt>
> >>>  To: "horde at lists.horde.org" <horde at lists.horde.org>
> >>>  Cc:
> >>>  Sent: Friday, October 7, 2011 3:43 PM
> >>>  Subject: Re: [horde] Upgrading to 4 from Groupware 1.2.9
> >>>
> >>>  Brian Spraker <spraker at yahoo.com> rašė:
> >>>
> >>>>   ----- Original Message -----
> >>>>>   From: Vilius Šumskas <vilius at lnk.lt>
> >>>>>   To: horde at lists.horde.org
> >>>>>   Cc:
> >>>>>   Sent: Friday, October 7, 2011 2:31 PM
> >>>>>   Subject: Re: [horde] Upgrading to 4 from Groupware 1.2.9
> >>>>>
> >>>>>   Sveiki,
> >>>>>
> >>>>>   Friday, October 7, 2011, 10:25:40 PM, you wrote:
> >>>>>
> >>>>>>     ----- Original Message -----
> >>>>>>>     From: Vilius Šumskas <vilius at lnk.lt>
> >>>>>>>     To: horde at lists.horde.org
> >>>>>>>     Cc:
> >>>>>>>     Sent: Friday, October 7, 2011 2:17 PM
> >>>>>>>     Subject: Re: [horde] Upgrading to 4 from Groupware
> > 1.2.9
> >>>>>>>
> >>>>>>>>     Even running directly as root (instead of using
> > sudo),
> >>>  same errors
> >>>>>   occur.
> >>>>>>>
> >>>>>>>     What "pear config-show -c horde" shows if
> > you set
> >>>  horde_dir
> >>>>>   manually
> >>>>>>>     in /root/.pearrc ?
> >>>>>>>
> >>>>>>>     --
> >>>>>>>     Best regards,
> >>>>>>>     Vilius
> >>>>>>>
> >>>>>>>     --
> >>>>>>>     Horde mailing list
> >>>>>>>     Frequently Asked Questions: http://horde.org/faq/
> >>>>>>>     To unsubscribe, mail:
> > horde-unsubscribe at lists.horde.org
> >>>>>>>
> >>>>>
> >>>>>>     Thats just the thing.. there is not a .pearrc file.
> > I've not
> >>>  deleted
> >>>>>   it and it doesn't appear.
> >>>>>
> >>>>>   Then  it  means  that  your  PEAR  cannot create one due to
> > permission
> >>>>>   problems, flaky security software on the server, or similar.
> > We cannot
> >>>>>   help here much.
> >>>>>
> >>>>>   All    I   could   suggest   is  try  installing  into
> > separate  PEAR
> >>>>>   installation.
> >>>>>
> >>>>>   --
> >>>>>   Best regards,
> >>>>>   Vilius
> >>>>
> >>>>
> >>>>   OK - I am one step further now.  Horde is installed and I
> > installed the
> >>>  Groupware Webmail edition based upon the install guide:
> >>>>
> >>>>   pear install -a -B horde/webmail
> >>>
> >>>  Are you sure that it is installed? pear list-files horde/horde
> >>> whould
> > show a
> >>>  file list. Check if those exist on disk. If not, installation
> >>> probably failed  but you missed error message in the output of
> PEAR.
> >>>
> >>>>   I then go to the webmail1/test.php file and receive:
> >>>>
> >>>>
> >>>>   Could not find Horde's framework libraries in the
> >>>>   following path(s):
> > /home/bsntech-com/www/webmail1/lib:.:/usr/share/php.
> >>>>   Please read horde/docs/INSTALL for information on how to
> install
> > these
> >>>>   libraries.
> >>>>
> >>>>   The system pear is properly installed with all needed
> components
> > at
> >>>  /usr/share/php AND the "lib" folder is in the
> > "webmail1"
> >>>  directory correctly.
> >>>
> >>>  --  Pagarbiai,
> >>>
> >>>    Vilius Šumskas
> >>>    LNK TV IT vadovas
> >>>    mob.: +370 614 75713
> >>>    http://www.lnk.lt
> >>>
> >>>
> >>
> >>  All looks good on the install.  I performed the 'pear list-files
> >> horde/horde' as you indicated and it ran off a huge number of
> files
> >> one-by-one.  But, here is the install history:
> >
> > Sorry I ment "pear list-files horde/horde_autoloader". What is the
> > output and do these files physically exist on the system?
> >
> > --
> >    Vilius
> >
> >
> Output:
> 
> Installed Files For horde/horde_autoloader
> ==========================================
> Type Install Path
> php  /root/pear/php/Horde/Autoloader/ClassPathMapper/Application.php
> php  /root/pear/php/Horde/Autoloader/ClassPathMapper/Default.php
> php  /root/pear/php/Horde/Autoloader/ClassPathMapper/Prefix.php
> php  /root/pear/php/Horde/Autoloader/ClassPathMapper.php
> php  /root/pear/php/Horde/Autoloader/Default.php
> php  /root/pear/php/Horde/Autoloader.php
> test
> /root/pear/tests/Horde_Autoloader/Horde/Autoloader/ClassPathMapper/Ap
> plicationTest.php
> test
> /root/pear/tests/Horde_Autoloader/Horde/Autoloader/ClassPathMapper/De
> faultTest.php
> test
> /root/pear/tests/Horde_Autoloader/Horde/Autoloader/ClassPathMapper/Pr
> efixTest.php
> test /root/pear/tests/Horde_Autoloader/Horde/Autoloader/AllTests.php
> test
> /root/pear/tests/Horde_Autoloader/Horde/Autoloader/AutoloaderTest.php
> 
> This is very strange to me... because it shows they are in the /root
> folder - which of course, the web user/php user will not have access
> to.  Either way, the /home/bsntech-com/www/webmail1/lib directory
> does exist and have data in there.. as does the system version of
> pear at /usr/share/php.
> 
> And yes - all of those files do physically exist in that folder.  Is
> there something else that should be set somewhere in the
> configuration - because these files should have been installed in the
> /root directory.  A whole /php directory was made in /root and it has
> a ton of stuff in it.

Did you reinstall PEAR as suggested?  Now might be a good time to delete all the horde files, and purge PEAR and start from scratch.  Even if you get this issue sorted out you'll likely run into others..

Simon