Default install w/ IMAP-UW won't work on FreeBSD - was [imp](no subject)

[Chris]

Greetings,
 Sorry I didn't look, I thought this was comming from the list.
I am using the HORDE2 with IMP3.1. According to HORDE this is
the correct combination.

Thanks again,
 Chris

> Quoting Chris <cth at fast.dnswatch.com>:
>
>> Greetings,
>>
>>> Quoting Chris <cth at fast.dnswatch.com>:
>>>
>>>
>>>>> Did you read the protocol section at the top of server.php?
>>>>
>>>> Yes, I did. But it appears I forgot to "dupe" the line I commented out
>>>> and add the correct protocol. The modified version follows:
>>>>
>>>>  $servers['imap'] = array(
>>>>      'name' => 'IMAP Server',
>>>>      'server' => 'localhost',
-------8<---[SNIP]---8<------
>>>>      'maildomain' => '<my domain.name here>',
>>>>      'smtphost' => 'localhost',
>>>>  //  'realm' => '<my host.domain.name here>',
>>>>      'realm' => '',
>>>>      'preferred' => ''
>>>>  );
>>>>
>>>> After making the modification, it still fails with the same error(s) as
>>>> indicated in my original message (further up.).
>>>>
>>>> Any other possibilities?
>>>>
>>>> Thanks for your input.
>>>
>>> If IMAP was built without SSL you should be able to telnet to port 143?
>>> If IMAP
>>> was built with SSL you'll have to go to port 993. And maybe simply
>>> using just
>>> IMAP as your protocol to a non-SSL buil of IMAP will help as well. I
>>> don't use
>>> UW IMAP, as a matter of fact I don't use any flovor of *NIX. So I'm a little
>>> out of place here.
>>>
>>> Thomas
>>
>> Thanks for your reply. The IMAP-UW from the FreeBSD ports that are available
>> for this version of FreeBSD builds an SSL/TLS version only. I have since at-
>> tempted to build the non-ssl/tls version with the -DWITHOUT_SSL
>> switch. However,
>> it did not eliminate the inability to logon without SSL/TLS. As a possible
>> reason for this, I'm going to guess that when PHP was built with IMAP
>> support,
>> that it included the SSL/TLS IMAP-UW. Which might mean having to build
>> mod_php4 again using the -DWITHOUT_SSL switch. Am I the only FreeBSD v.5 user
>> attempting to install a *working* copy of HORDE/ IMP? Please speak up
>> if you have
>> any pointers on this.
>> Thanks for all your time and consideration in this matter.
>>
>> --Chris
>>
>>
>
> Chris,
>
> I wouldn't have any idea who else might be using FreeBSD v.5 but let's
> get this
> thread back on the list and see if there's anyone out there.
>
> Another thing to verify is that your using the correct version of HORDE
> and the
> Framework. You can check this at http://www.horde.org/source/versions.php
>
> Good luck.
>
> Thomas